Jacob P

Lighthouse Dice Tower

by
ThinAir3D
Follow
Follow
Remix Model
ThinAir3D
ThinAir3D
|
Image 1 of 7
Lighthouse Dice Tower 3d model
ThinAir3D
ThinAir3D
|
Image 1 of 7
Lighthouse Dice Tower 3d model
2D
3D
Makes
Lighthouse Dice Tower 3d model
Lighthouse Dice Tower 3d model
Lighthouse Dice Tower 3d model
Lighthouse Dice Tower 3d model
Lighthouse Dice Tower 3d model
Lighthouse Dice Tower 3d model
Lighthouse Dice Tower 3d model

A Dice Tower/Tealight Holder Combo. The inspiration behind this was a lighthouse, although to be honest it could past as a normal tower as well. This design prints in 4, support-free pieces and links together afterwards. You can use the design with the pieces just stacked on top of each other, or you can glue the bottom 3 pieces. The top piece serves as a "lid" to hold the tealight candle (battery powered ONLY, don't use a real candle please).

I had someone suggest creating some features around the base of the tower to "catch" the dice. I have plans to do this still, so be on the lookout for a "diarama" version of the tower in the near future.

Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM - FDM Scaling: Can be scaled up, may not work too well scaled down. Supports: None Infill/Perimeters: 25% Infill + 2 Perimeters Nozzle Size: 0.4 Layer Height: 0.2

Printing & Assembly: There are 4 pieces to print for this design. They are all SUPPORT-FREE. Just print and stack together. You may choose to glue the bottom 3 pieces together.

File List (4):

  • lighthouse_tower (STL's)
  • lighthouse_balcony (STL's)
  • lighthouse_tealight_holder (STL's)
  • lighthouse_cap (STL's)

103 Likes98 DownloadsSeptember 19, 2023


103 Likes98 DownloadsSeptember 19, 2023