Hey everyone!
This is the Desktop Dumpster Fire. This design prints support free and everything snaps together afterwards. It features rotating casters and a removable "fire" insert. The insert can be displayed on the left or right side of the dumpster.
I created this design with desktop storage in mind, but it could be used for all sorts of things. I even gave one to a friend to use as a tip jar!
Speaking of tips, when assembling the Desktop Dumpster it will be easiest to snap the pins into the caster brackets before snapping the wheels into place. Then you can snap the entire assembly into the bottom of the dumpster.
Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up. Wheels & casters may have issues if scaled down too far, although those elements could be optional. Supports: None Infill/Perimeters: 10% infill + 2 perimeters Nozzle Size: 0.4 Layer Height: 0.2
Printing & Assembly: No supports are needed for this model, just print the pieces in the orientation that they import in and snap everything together afterwards.
*Tip: Snap the pins into the casters before snapping the wheel into place. Then snap the assembly into the bottom of the dumpster.
File List (4):
- dumpster (STL)
- dumpster_doors (STL)
- wheels_and_casters (STL)
- fire (STL)