Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5764003.

My F-15E WSO Hand Controller plans are now available here:  https://cults3d.com/en/users/TheSimNet/3d-models

Update 09/22/2023 - Added F-5E extension

Update 07/06/23 - Added 5-way Navigation Switch to BOM, added new HAT assemblies for Trim and Thumb hats, created assembly video: https://youtu.be/NCqwo6CMvdI
Update 02/02/23 - Added F-5E Grip + Alternate HAT switches (assembly video to follow)

This is a functional 3D print for a PC Joystick Grip compatible with the Thrustmaster Warthog Base and Virpil Mongoose/WarBRD Base. 

Highly accurate replica of the grip used in many "Century Series" aircraft and Helicopters from the F-4 Phantom to the F-5 Tiger to the UH-1 Huey and AH-1 Cobra and many, many more! 


Video assembly guide and BOM available below.

I began working on this project a year ago when Heatblur Simulations announced they are working on an F-4 Phantom module in DCS World, a high fidelity combat flight simulator. I scanned a real B-8 grip and built a 3D model in Blender. Over the last year I have printed about 30 grips in different configurations to ensure a model that is easy to print, easy to assemble, and finally, easy to build! 

Huge shoutout to Debolestis and JFlyer who inspired me with their projects. You guys rock!

Full BOM below:

2x CD4021 Shift Register
2x 9-Pin 10k Resistor Networks
1x 10k Through Hole Resistor
1x 100nF Through Hole Ceramic Capacitor
1x 5-Pin Mini Din Male Connector 
1x ALPS RKJXT1F42001 ****OR**** Thru-hole 5-way Navigation switch (https://www.adafruit.com/product/504) 
3x Momentary Push Button Switch AC 250V 2A/120V 5A NO/NC SPDT - 8121SHZGE style button with red caps - 3-Pin
1x 0.5*6*15 0.5mm Wire Diameter, 6mm Width, 15mm Length 304 Steel Spring
1x 0.5*9*15 0.5mm Wire Diameter, 9mm Width, 15mm Length 304 Steel Spring
2x 12x12x7.3 Tact Switch TC-1212T 
4x M2x10 Screw DIN7991
5x M2x20 Screw DIN7991
2x M3x40 Screw DIN7991
1x M3x5 Screw DIN7991
3x M3 Nut DIN934

Assorted Dupont Wires - 
(Dupont connectors are optional - everything could just be soldered together without them. I personally soldered wires into the PCB, and with the female dupont connector free on the end, and added male dupont connectors to all my buttons - that way the buttons can be "hot swapped" if needed for maintenance or to change out the feel and style)

Debolestis Shift Register 16 PCB
https://oshpark.com/profiles/Debolestis/page/2

More projects are on the way - I am also working on an F-5E Throttle, and other F-4 Phantom (Late) Grips for the F-4E and F-4J. Future files may be put up on cults for a small charge as this does take a lot of my time! Keep in touch with me on social @TheSimNet.

Questions? Email me at questions@thesimnet.com 

Edit: Added VKB Gunfighter insert

The alternate HAT using tact switches can be assembled like so (if you do not have access to the Thru-Hole NAV switch) https://youtube.com/shorts/VZK5yUGU6Is


Century Series Grip - F-4 Phantom Joystick + Many Aircraft - Updated B-8 Grip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6406942.

These Buttons, Switches, and Connectors for my F-15 Grip are free to download and modify. The grip itself is available for purchase, details here: https://youtu.be/Fe2dHtFJDu8

F-15 Eagle Buttons and Caps

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5994828.

This adapter fits onto Thrustmaster/Virpil threads and forms a magnetic base that the wand can snap into using 6mm x 3mm magnets. 

This is a combination of tigerflips excellent grip + my own design for interfacing custom sticks with Thrustmaster/Virpil bases from this project: https://www.thingiverse.com/thing:5764003

Supports are recommended for the thread and for the inside of the baseplate

VTOl VR Thrustmaster/VIRPIL Gimbal to Magnetic Quest 2 Adapter

This is a scale re-creation of an F-15 Joystick Grip based on a lidar scan. This grip is ready to be combined with the electronics mentioned below to form a fully functional simulator joystick grip. For more details see this video: https://youtu.be/Fe2dHtFJDu8

Compatible with Thrustmaster/Virpil/VKB Bases (VKB only with adapter and some soldering)

Assembly video coming soon!

Full BOM Below:
3x CD4021 Shift Register

3x 9-Pin 10k Resistor Networks

1x 10k Through Hole Resistor

1x 100nF Through Hole Ceramic Capacitor

1x 5-Pin Mini Din Male Connector

Thru-hole 5-way Navigation switch (https://www.adafruit.com/product/504)

2x Momentary Push Button Switch AC 250V 2A/120V 5A NO/NC SPDT - 8121SHZGE style button with red caps - 3-Pin

2x Mini Micro Limit Switch 5A 125 250V AC SPDT 1NO 1NC Momentary Switch Snap Action Button Type 3 Pins (no lever)

1x Torsion Spring 5mm OD or Compression spring OD 8mm (can use both for double the return force)

13x M3 Screws Total:
4x M3x20
9x M3x16

Trigger instructions here: https://www.thingiverse.com/thing:6289942

Debolestis PCB Available Here: https://oshpark.com/shared_projects/OTJrlwA4

ALPS Switches Alps RKJXM1015004

Per ALPS PCB: Quantity 4x: CUS05S40,H3F Schottky Diode Quantity 7x: RNCP0805FTD1K00 Chip Resistor - Surface Mount 1 kOmh Quantity 2x: MMBT3904-TP Surface Mounted Transistor Quantity 1 Alps RKJXM1015004

My PCBWay referral link:
https://pcbway.com/g/jwr15D

Assorted Dupont Wires 20 AWG

F-15 EAGLE JOYSTICK GRIP BY THESIMNET

1THESIMNET_EAGLE_GRIP.stl

3D Printable Joystick grip compatible with Virpil and Thrustmaster bases. For assembly of these kinds of grips and more flight sim goodies, follow @TheSimNet youtube.com/@thesimnet

Full BOM:

12mmx12mmx12mm Tact Switch https://www.adafruit.com/product/1009

Debolestis PCB https://oshpark.com/shared_projects/ta3Mpmcz

Mini Micro Limit Switch 5A 125 250V AC SPDT 1NO 1NC Momentary Switch Snap Action Button Type 3 Pins (no lever)

Torsion Spring 5mm OD or Compression spring OD 8mm (can use both for double the return force)

CD4021 Shift Register

9-Pin 10k Resistor Networks

10k Through Hole Resistor

100nF Through Hole Ceramic Capacitor

5-Pin Mini Din Male Connector

6x M3 Screws and Nuts

P-51 Mustang Joystick Grip by @TheSimNet

TheSimNet_B6_Grip_V1.stl

Introducing the Universal Flight Sim Trigger Module by @TheSimNet! 

Featuring:

Dual or Single Stage operation
Authentic operation
Consistent return force
Satisfying break action click
Parts required:

Mini Micro Limit Switch 5A 125 250V AC SPDT 1NO 1NC Momentary Switch Snap Action Button Type 3 Pins (no lever)
Torsion Spring 5mm OD or Compression spring OD 8mm (can use both for double the return force)

https://youtu.be/stQPan0KQIw

Universal Trigger for Joysticks - Open Source

TheSimNet_Trigger_3.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TheSimNet

Achievements

Seedling

Debutant