Bookmark of Lord Shiva

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Blue
3. PLA Teal
4. PLA White

**Swap Instructions:**
1. Start with Black
2. At layer #6 (0.56mm) swap to Blue
3. At layer #12 (1.04mm) swap to Teal
4. At layer #15 (1.28mm) swap to White for the rest

Shiva Bookmark

Shiva.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Red
3. PLA Orange
4. PLA White

**Swap Instructions:**
1. Start with Black
2. At layer #6 (0.56mm) swap to Red
3. At layer #11 (0.96mm) swap to Orange
4. At layer #14 (1.2mm) swap to Jade White for the rest.

Hindu warriors charging into battle Bookmark

Hindu warriors charging into battle.stl

Rangoli is a traditional Indian art form in Hinduism. This is a collection of bookmarks showcasing the beauty of Rangoli

Rangoli Bookmarks

Rangoli is a traditional Indian art form in Hinduism, where patterns are created on the floor using materials like colored powders, rice, and flower petals, especially during festivals. It is believed to invite prosperity, ward off negative energy, and symbolize the welcoming of deities making it an important ritual to bring positive energy and blessings into the home.

Rangoli Bookmark Collection:https://thangs.com/designer/TheButterThief/collection/Rangoli%20Bookmarks-80558
Wikipedia: https://en.wikipedia.org/wiki/Rangoli

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Darker Bookmark**
**Filaments Used:**
1. PLA Black
2. PLA Red
3. PLA Yellow
4. Pla White

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Red
3. At layer #11 (0.96mm) swap to Yellow
4. At layer #18 (1.52mm) swap to Jade White for the rest.

**Lighter Bookmark**
**Filaments Used:**
1. PLA Blue
2. PLA Magenta
3. PLA Yellow
4. PLA White

**Swap Instructions:**
1. Start with Blue
2. At layer #7 (0.64mm) swap to Magenta
3. At layer #11 (0.96mm) swap to Yellow
4. At layer #18 (1.52mm) swap to White for the rest.

Rangoli Bookmark #4 (Lotus and Lamps)

Rangoli 4.stl

Bookmarks depicting scenes and characters from the Ramayana

Ramayana Bookmarks

This bookmark is based on the story of Bhagwan Hanuman chasing the Sun as a child from the Hindu Epic Ramayana.

According to the legend, Hanuman, the devoted follower of Bhagwan Rama, was born with extraordinary powers. As a child, he was mischievous and playful.

One day, he mistook the sun for a ripe fruit in the sky and, being hungry, decided to catch and eat it. Hanuman leapt into the air with great speed and strength, determined to reach the glowing sun. His pursuit caused concern among the gods. As Hanuman soared towards the Sun, the celestial beings worried that he might cause harm to the universe by swallowing the sun, thus plunging the world into darkness.

Indra, the king of the gods, intervened to stop Hanuman. He hurled his powerful weapon, the Vajra (thunderbolt), at Hanuman, striking him on the jaw and causing him to fall to the ground unconscious. As a result of this blow, Hanuman's jaw (known as hanu in Sanskrit) was damaged, and this is how he earned the name "Hanuman."

Seeing his beloved child injured, Hanuman's father, Vayu, the wind god, became enraged and withdrew all air from the universe, threatening to suffocate all living beings. To appease Vayu and restore balance, the gods gathered and blessed Hanuman with various boons. He was granted invincibility, immense strength, and the ability to change his form at will.

This story not only highlights Hanuman's innocence and strength but also serves as an important moment in his journey, where he gains divine blessings and powers that later help him play a crucial role in Bhagwan Rama's quest to rescue Sita in the Ramayana.

Ramayana Bookmark Collection: https://thangs.com/designer/TheButterThief/collection/Ramayana%20Bookmarks-77230

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Orange
3. PLA White
4. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Orange
3. At layer #12 (1.04mm) swap to White White
4. At layer #18 (1.52mm) swap to Yellow for the rest.

Hanuman chasing the Sun

Hanuman chasing the Sun_Front_65x175.stl

Rangoli is a traditional Indian art form in Hinduism, where patterns are created on the floor using materials like colored powders, rice, and flower petals, especially during festivals. It is believed to invite prosperity, ward off negative energy, and symbolize the welcoming of deities making it an important ritual to bring positive energy and blessings into the home.

Rangoli Bookmark Collection:https://thangs.com/designer/TheButterThief/collection/Rangoli%20Bookmarks-80558
Wikipedia: https://en.wikipedia.org/wiki/Rangoli

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


**Darker Bookmark**
**Filaments Used:**
1. PLA Black
2. PLA Red
3. PLA Yellow
4. Pla White

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Red
3. At layer #11 (0.96mm) swap to Yellow
4. At layer #18 (1.52mm) swap to Jade White for the rest.
 

**Lighter Bookmark**
**Filaments Used:**
1. PLA Blue
2. PLA Magenta
3. PLA Yellow
4. PLA White

**Swap Instructions:**
1. Start with Blue
2. At layer #7 (0.64mm) swap to Magenta
3. At layer #11 (0.96mm) swap to Yellow
4. At layer #18 (1.52mm) swap to White for the rest.

Rangoli Bookmark #3 (Lotus and Lamps)

Rangoli 3_Front_50x150.stl

Rangoli is a traditional Indian art form in Hinduism, where patterns are created on the floor using materials like colored powders, rice, and flower petals, especially during festivals. It is believed to invite prosperity, ward off negative energy, and symbolize the welcoming of deities making it an important ritual to bring positive energy and blessings into the home.

Rangoli Bookmark Collection: https://thangs.com/designer/TheButterThief/collection/Rangoli%20Bookmarks-80558
Wikipedia: https://en.wikipedia.org/wiki/Rangoli

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Lighter Bookmark**
**Filaments Used:**
1. PLA Yellow
2. PLA Magenta
3. PLA White

**Swap Instructions:**
1. Start with Yellow
2. At layer #8 (0.72mm) swap to Magenta
3. At layer #16 (1.36mm) swap to White for the rest.


**Darker Bookmark**
**Filaments Used:**
1. PLA Black
2. PLA Magenta
3. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #8 (0.72mm) swap to Magenta
3. At layer #16 (1.36mm) swap to Yellow for the rest.

Rangoli Bookmark #2

Rangoli 2_Front_50x150.stl

**Description**
Rangoli is a traditional Indian art form in Hinduism, where patterns are created on the floor using materials like colored powders, rice, and flower petals, especially during festivals. It is believed to invite prosperity, ward off negative energy, and symbolize the welcoming of deities making it an important ritual to bring positive energy and blessings into the home.

Rangoli Bookmark Collection: https://thangs.com/designer/TheButterThief/collection/Rangoli%20Bookmarks-80558
Wikipedia: https://en.wikipedia.org/wiki/Rangoli

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Red
3. PLA Blue
4. PLA Green
5. PLA Beige

**Swap Instructions:**
1. Start with Black
2. At layer #5 (0.48mm) swap to Red
3. At layer #10 (0.88mm) swap to Blue
4. At layer #13 (1.12mm) swap to Green
5. At layer #14 (1.2mm) swap to Beige for the rest.

Rangoli Bookmark #1

Rangoli_Front_50x150.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Red
3. PLA Orange
4. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Red
3. At layer #10 (0.88mm) swap to Orange
4. At layer #12 (1.04mm) swap to Yellow for the rest.

Maa Durga charging into battle

Durga Charging into battle_Front_50x150.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Red
3. PLA Orange
4. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Red
3. At layer #12 (1.04mm) swap to Orange
4. At layer #18 (1.52mm) swap to Yellow for the rest.

Bookmark of Medieval Indian Army Marching

Indian Army Marching_Front_150x50.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Orange
3. PLA White
4. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #9 (0.8mm) swap to Orange
3. At layer #15 (1.28mm) swap to White
4. At layer #18 (1.52mm) swap to Yellow for the rest.

Hindu Temple Bookmark

Hindu Temple Upscaled_Front_50x150.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Gray
3. PLA White

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Gray
3. At layer #12 (1.04mm) swap to White for the rest

Floofy Cat Bookmark

Poondu Sticker_Front_175x175.stl

Bookmark of Ravana playing the Veena from the Hindu Epic Ramayana

Ramayana Bookmark Collection: https://thangs.com/designer/TheButterThief/collection/Ramayana%20Bookmarks-77230

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Orange
3. PLA White
4. PLA Red

**Swap Instructions:**
1. Start with Black
2. At layer #6 (0.56mm) swap to Orange
3. At layer #12 (1.04mm) swap to White
4. At layer #17 (1.44mm) swap to Red for the rest.

Ravana Playing Veena

Ravana Playing Veena_Front_175x59.stl

Bookmark of Sita on the river from the Hindu Epic Ramayana

Ramayana Bookmark Collection: https://thangs.com/designer/TheButterThief/collection/Ramayana%20Bookmarks-77230

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Orange
3. PLA Light Blue
4. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #10 (0.88mm) swap to Orange
3. At layer #14 (1.2mm) swap to Light Blue
4. At layer #18 (1.52mm) swap to Yellow for the rest



Sita on the river

Sita on the river (Dheepu)_Front_175x59.stl

Bookmark of Rama hunting Maricha from the Hindu Epic Ramayana
https://en.wikipedia.org/wiki/Maricha?useskin=vector#Role_as_the_golden_deer

Ramayana Bookmark Collection: https://thangs.com/designer/TheButterThief/collection/Ramayana%20Bookmarks-77230

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Orange
3. PLA Green
4. PLA Yellow

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Orange
3. At layer #13 (1.12mm) swap to Green
4. At layer #14 (1.2mm) swap to Yellow for the rest.

Bookmark of Rama hunting Maricha

Rama hunting deer_Front_175x59.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Black
2. PLA Magenta
3. PLA Yellow
4. PLA White

**Swap Instructions:**
1. Start with Black
2. At layer #7 (0.64mm) swap to Magenta
3. At layer #17 (1.44mm) swap to Yellow
4. At layer #18 (1.52mm) swap to White for the rest.

Princess Peach Stained Glass Bookmark

Peach Stained Glass_Front_50x150.stl

**Printing Instructions**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

**Filaments Used:**
1. PLA Marine Blue
2. PLA Black
3. PLA Teal
4. PLA Orange
5. PLA White

**Swap Instructions:**
1. Start with Marine Blue
2. At layer #4 (0.4mm) swap to Black
3. At layer #6 (0.56mm) swap to Marine Blue
4. At layer #10 (0.88mm) swap to Teal
5. At layer #14 (1.2mm) swap to Orange
6. At layer #18 (1.52mm) swap to White for the rest.

Disney Princess Jasmine Stained Glass Bookmark

Jasmine_Front_44x150.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TheButterThief

Achievements

Seedling

Debutant