A mount for the JEDEW 3 Pack Mini Digital Hygrometers you can find on Amazon, meant to get your hygrometer up away from your desiccant for a more precise reading. This version features stand-offs sized for Gorilla Tough & Clear double-sided mounting tape. The hygrometer face and the tape will contact at the same time for a precise fit. The mount also features locating slots for the hygrometer tabs.
AMS Use: There is about an 1/8th inch of clearance on the back side between the hygrometer and spool. When you print using the outside spools, they may rub the back side of the hygrometer. It didnt affect the hygrometer or spool/print for me. Just kept switching it between Celsius and Fahrenheit. Prolonged usage could eventually cause issues to the hygrometer, but it only contacted for me when the AMS was pulling filament from the side opposite the mount.
Other Use: Put them wherever you want a clear view of the temp and RH of your storage containers.
Settings: I printed them out of Bambu Lab Sparkle PLA and another set out of Numakers PLA+ using the manufacturer-recommended settings for both. Infill at 30% if i remember correctly. The Gorilla tape is very strong so weight isn't a huge issue as far as combating sagging, but no sense in making it weigh more than it needs to.