Voronoi Sphere Candle Holder.

Here you can download the ready STL file for this beautiful decorative vase. You'll be able to download STL files for two sizes: with diameter 12cm and 15 cm. The print goes really smooth with some overhangs which you can carefully shave with an X-acto knife. Please, be careful. For better print results, please, check and follow the recommended slicer settings below.

3D PRINTING SETTINGS

I recommend to print this vase with PLA+ as it's much stronger than normal PLA.

Recommended settings:

Nozzle: 0.4mm Layer height: 0.16mm Wall line count: 3 Top/bottom thickness: 0.84mm Infill density: 20 Nozzle temperature: 210°C Bed temperature: 60°C Print speed: 40 To avoid warping you can add raft. No supports are needed if you print it with PLA+