Here you can download the ready STL file for this beautiful decorative vase.
You'll be able to download STL files for two sizes: with diameter 12cm and 15 cm.
The print goes really smooth with some overhangs which you can carefully shave with an X-acto knife. Please, be careful.
For better print results, please, check and follow the recommended slicer settings below.
3D PRINTING SETTINGS
I recommend to print this vase with PLA+ as it's much stronger than normal PLA.
Recommended settings:
Nozzle: 0.4mm
Layer height: 0.16mm
Wall line count: 3
Top/bottom thickness: 0.84mm
Infill density: 20
Nozzle temperature: 210°C
Bed temperature: 60°C
Print speed: 40
To avoid warping you can add raft.
No supports are needed if you print it with PLA+
