I've made a double sided Easter little Diorama, mixing both 2D and 3D pieces.
You can have fun by printing all the pieces separated and decorate each piece as you prefer before composing your little diorama!
Hope you like it!
Happy Easter everyone!! 🐰
(You get both separated pieces and full version with this file. You can also find a "special" part which will be used for SUNLU contest here) ⸻⸻⸻⸻⸻⸻⸻⸻ 𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
- 3D Printers: Anycubic Mega S/SE | Fokoos Odin-5 F3 | Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.3 mm (0.4 mm wall thickness; 3 top / bottom layers)
- Infill : 50% (Lightning)
- No support needed
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 60 mm/sec | Outer Wall Speed: 30mm/sec
- Filaments: SUNLU
- Size: Full version 8,7 x 8,2 x 12 cm (X, Y, Z) ⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻ 𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚. ⸻⸻⸻⸻⸻⸻⸻⸻
If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits : https://www.patreon.com/RandomizY ⸻⸻⸻⸻⸻⸻⸻⸻
INSTAGRAM : https://www.instagram.com/randomizy.3d/
TWITTER : https://twitter.com/Randomizy3D
FACEBOOK : https://www.facebook.com/randomizy.3D
Check More Here : https://linktr.ee/RandomizY