I've made a double sided Easter little Diorama, mixing both 2D and 3D pieces.
You can have fun by printing all the pieces separated and decorate each piece as you prefer before composing your little diorama!
Hope you like it!
Happy Easter everyone!! ๐ฐ
(You get both separated pieces and full version with this file. You can also find a "special" part which will be used for SUNLU contest here) โธปโธปโธปโธปโธปโธปโธปโธป ๐ ๐ฌ ๐ฏ๐ ๐ฃ๐ฅ๐๐ก๐ง๐๐ก๐ ๐ฆ๐๐ง๐ง๐๐ก๐๐ฆ :
- 3D Printers: Anycubic Mega S/SE | Fokoos Odin-5 F3 | Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.3 mm (0.4 mm wall thickness; 3 top / bottom layers)
- Infill : 50% (Lightning)
- No support needed
- Printing Temperature: 205ยฐC / Build Plate Temperature: 60ยฐC
- Print speed: 60 mm/sec | Outer Wall Speed: 30mm/sec
- Filaments: SUNLU
- Size: Full version 8,7 x 8,2 x 12 cm (X, Y, Z) โธปโธปโธปโธปโธปโธปโธปโธป
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @๐ง๐๐ฃ๐๐ค๐ข๐๐ฏ๐ฎ.3๐, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #๐ง๐๐ฃ๐๐ค๐ข๐๐ฏ๐ฎ when sharing your video)
โธปโธปโธปโธปโธปโธปโธปโธป ๐๐๐๐จ ๐ฌ๐ค๐ง๐ ๐๐จ ๐ก๐๐๐๐ฃ๐จ๐๐ ๐ช๐ฃ๐๐๐ง ๐ฉ๐๐ ๐พ๐ง๐๐๐ฉ๐๐ซ๐ ๐พ๐ค๐ข๐ข๐ค๐ฃ๐จ ๐ผ๐ฉ๐ฉ๐ง๐๐๐ช๐ฉ๐๐ค๐ฃ-๐๐ค๐ฃ๐พ๐ค๐ข๐ข๐๐ง๐๐๐๐ก-๐๐ค๐ฟ๐๐ง๐๐ซ๐๐ฉ๐๐ซ๐๐จ 4.0 ๐๐ฃ๐ฉ๐๐ง๐ฃ๐๐ฉ๐๐ค๐ฃ๐๐ก ๐๐๐๐๐ฃ๐จ๐. โธปโธปโธปโธปโธปโธปโธปโธป
If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits : https://www.patreon.com/RandomizY โธปโธปโธปโธปโธปโธปโธปโธป
INSTAGRAM : https://www.instagram.com/randomizy.3d/
TWITTER : https://twitter.com/Randomizy3D
FACEBOOK : https://www.facebook.com/randomizy.3D
Check More Here : https://linktr.ee/RandomizY