Roy B

Print-In-Place Present (Mini)

by
RWBDesigns
Follow
Follow
Remix Model
RWBDesigns
RWBDesigns
|
Image 4 of 7
Print-In-Place Present (Mini) 3d model
RWBDesigns
RWBDesigns
|
Image 4 of 7
Print-In-Place Present (Mini) 3d model
2D
3D
Makes
Print-In-Place Present (Mini) 3d model
Print-In-Place Present (Mini) 3d model
Print-In-Place Present (Mini) 3d model
Print-In-Place Present (Mini) 3d model
Print-In-Place Present (Mini) 3d model
Print-In-Place Present (Mini) 3d model
Print-In-Place Present (Mini) 3d model
This model is restricted by licensing terms.Β 

🎁 This print-in-place box is the perfect packaging for any present this holiday season. Unlike a regular gift that needs to be carefully unwrapped, this gift box unwraps itself; all you need to do is remove the lid, and the box sides will fall away. And when you are prepping the box simply fold the sides up, place the lid on top, and your gift is ready to present. 🎁

-This is the mini version of our Print-in-Place Present, only needing a 170mm cubed build volume, meaning that it will fit on almost any printer, including ones such as the Prusa mini. Once folded, the box can accommodate gifts inside that are approximately 40mm cubed or smaller.

-Assembly Note: The first few threads for the bow are small, so make sure it is parallel to the lid and twist slowly to avoid cross-threading

-(AMS files are included for Bambu Labs Users as well as models for traditional dual-color slicing)

🚨🚨🚨🚨🚨🚨

This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true

🚨🚨🚨🚨🚨🚨

Print Settings: .1mm - .16mm layerheight No support for the box or bow Support should be enabled for the lid but only for the circular underside of the threaded hole 25% infill


49Β Likes69Β DownloadsNovember 24, 2023


49Β Likes69Β DownloadsNovember 24, 2023
This model is restricted by licensing terms.Β