This Hueforge star makes a great addition to any space. The centerpiece is a star with a winter aesthetic, it uses layer swaps to achieve a blend of 4 colors. Since it uses layer waps, these can be done with manual pauses in between layers with no need for a multi-color or material-capable printer.
(A pre-sliced .3mf file is included for Bambu Labs users with an ams)
🚨🚨🚨🚨🚨🚨
This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true
🚨🚨🚨🚨🚨🚨
Print Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: ASA PolyLite Black Transmission Distance: 0.3 ASA PolyLite Red Transmission Distance: 1.5 ASA PolyLite PolyMaker Teal Transmission Distance: 0.5 ASA PolyLite White Transmission Distance: 0.5
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to PolyMaker Teal At layer #15 (1.28mm) swap to White for the rest.