This is a Hueforge print made from the thumbnail of my fin vase model. It only uses four colors and is more abstract than realistic in design. As time passes, I hope to improve my skills at Hueforge and make even better prints with it.
🚨🚨🚨🚨🚨🚨
This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true
🚨🚨🚨🚨🚨🚨
Print Intructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: ASA PolyLite Black Transmission Distance: 0.3 ASA PolyLite Blue Transmission Distance: 0.3 ASA PolyLite PolyMaker Teal Transmission Distance: 0.5 ASA PolyLite White Transmission Distance: 0.5
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #13 (1.12mm) swap to PolyMaker Teal At layer #16 (1.36mm) swap to White for the rest.