Hook 1x1 - Cargo Attachment
Add instant hanging storage to your Cargo Modular setup with a compact, fast-printing hook that keeps everyday items easy to grab whenever you need them.
Main Features
- Quick, easy hanging storage for everyday items
- Slides onto Cargo Connect Rails for flexible storage placement
- Infinitely modular - expand, move and rearrange your setup anytime
- Support-free printing with quick, simple assembly
- Fully 3D printable design
- Prepared ‘Ready to Print’ file included
- Built-in label slot for custom organisation
What is the Cargo Modular System? Imagine a fully 3D printable system that can organise every aspect of your life, from your kitchen or workshop, to your gaming setup or craft studio.. that is our goal for the Cargo Modular System.
We are documenting the development on our social media channels and we'd love for you to join us as the Cargo system grows and evolves. If you have any upgrades you’d love to see or feedback, be sure to leave a comment!
What we use:
3D printer - Bambu Lab P1S - Get one here*
Filament - Bambu Lab PLA Basic Dark Grey and Matte Marine Blue- Get some here*
What's Included:
When you have downloaded the model, you will find the below inside:
Ready to Print (.3mf file) - All the parts in one place and ready to print. User Guide (.pdf file) - A complete ‘User Guide’ to help you print and assemble the model. Extras (.Zip folder) - Contains any Optional Parts and an Archive of previous versions of the model, if applicable.
Happy Printing
Play Conveyor
*Some links in this description are affiliate links, which means we may earn commission if you purchase through them.
Hook 1x1 - Cargo Attachment
Cargo Containers - 1x1 (Mini Modular Storage)
Rails 1x1 - Cargo Connect
Cargo Containers - 2x1 (Medium Modular Storage)
Extending Shelf - Cargo Attachment
Cargo Containers - 1x2 (Medium Modular Storage)
Shelf 2x2 - Cargo Attachment
Cargo Connect - Desk Tile
Cable Organiser USBC 2x2 - Cargo Attachment
Cargo Containers - 3x1 (Large Modular Storage)
Frames - Cargo Connect
Cargo Containers - 2x2 (Medium Modular Storage)
Shelf 3x3 - Cargo Attachment
Gripper 1x1 - Cargo Attachment
Cargo Containers: Battery Storage
Cable Organiser USBC 1x1 - Cargo Attachment
Half Spacer - Cargo Connect
Shelf 1x1 - Cargo Attachment
Cargo Containers: Adapter - Underdesk
Shelf 2x3 - Cargo Attachment
I am batting around 300 with your items. i have printed on a kobra s1 and p1s both had a 40% failure on items on bed. last night i went to bed with kobra s1, kobra s3, sovol sv06aceplus, bambu p1s i woke up this morning about $20 lighter as hardly anything printed. every bed was full of spagetti world. every bed was sprayed with hair spray and all proper settings. i had just finished a 38 hour print of the p1s feel like this is a waste of money
Hey,
If your prints are coming loose mid-print, it’s more often than not due to poor bed adhesion. As the print grows, stress on the base increases, so even small adhesion issues early on can lead to full print failure.
All of our designs are tested across a range of printers (including the P1S), and we consistently get reliable results using standard print settings.
We’ve listed some quick tips below – if you're still running into issues, feel free to DM us on Thangs - we're happy to help!
1. Clean your bed thoroughly – even small amounts of dust, or even hairspray/glue buildup can seriously reduce adhesion.
2. Re-run your first layer calibration – even a slightly too-high nozzle can lead to poor first-layer grip.
3. Print one item at a time while troubleshooting – this helps isolate issues and prevents a single failure from ruining the whole plate.
4. Use a brim or raft – the added surface area can greatly improve adhesion and print reliability.
Hi have you anything to hold pliers /mole grips