Hey everyone, this is a replica model of the Folklore Cabin from Taylor Swift's Eras Tour!

The cabin was modeled in Fusion360 and then broken up into components. Model includes all four walls, a base, and both roof pieces. I used generic PLA for the prints, and then I used acrylic paint to give the model the brown color.

If you are interested in printing the cabin all together, I have included that as an .STL file!

**If printing the cabin as individual pieces: ** Paint the individual pieces first (if painting) Sand down the contact points I would recommend using a strong adhesive (Loctite, epoxy resin, some sort of 3D print welding material) to glue the pieces together Ensure everything dries before applying the moss with a coat of regular Elmer's glue **If printing the cabin as ONE piece: ** I would only recommend printing on 50% silent to ensure the fragile cross beams in the walls do not break I would recommend using 4 walls, 15% infill to ensure enough rigidity I would use tree supports if printing in the normal upright orientation

Thanks for printing! Message with any questions.