I go to swim and I usually take a shower in the club. This avoids the shampoo spills in my sport bag.  It's a must-have for safe transport. 

Parametric file can be found in the following link: https://www.printables.com/model/781769-universal-pump-guard

**Print Settings:**

- 0.2mm Layer Height
- 100% infill

Universal Pump Guard

dispenser_lock.3mf

Introducing my first original creation, crafted out of necessity for a mount for my Tapo C200 camera to monitor my prints remotely. Finding no existing mounts for my Ender 3 S1 Pro, I embarked on a journey to learn Fusion 360 and designed my own!

After 25 iterations, refining through meticulous caliper measurements for precision, I optimized the design for durability and stability, while ensuring the arm remains hollow to conserve filament—yet maintaining a 3mm thickness for robustness. This project was a thrilling learning curve.

Proudly, this mount is my humble contribution, crafted with dedication. I hope it enhances your setup as much as it has mine. I welcome your feedback and suggestions for improvements or any issues encountered.
Print Settings

- Supports: Yes
- Resolution: 0.2mm
- Infill: 20% or 30%
- Filament material: PLA
- Notes: Supports are necessary for Lego connections. It is recommended to print the c200_camera_mount.stl piece with flattest side down. Also if you can do >30% will be more stable, but 20% it's enough to save some filament.

Tapo C200 Ender 3 S1 Pro Mount 

c200_camera_mount.stl

Streamline your space with our minimalist wall mount for Alexa Echo 3rd Gen. Requires just two 3.5mm screws for a quick setup. Designed to be filament-efficient, it uses only 8g! Enjoy a tidy space. :)

**Print Settings:**

- Layer Height: 0.2mm
- Supports: None needed
- Infill: 20%
- Material: PLA

Alexa Echo 3rd Generation Wall Mount 

Alexa_Mount_Holder v5.3mf

This is a simple minimalist tool to verify thickness of printed filament. Takes around 15minutes and 1g of filament in standard settings.

**Measures:**

10x50x5mm

**Print Settings:**

- Layer Height: 0.2mm
- Infill: 20% - 50%
- Material: PLA

Gauge Print Thickness

Gauge_Thickness v1.3mf

So I designed several silhouettes made in my 3d Printer and also designed a frame stand for them. Tried several models and my main goal was to save as much filament without compromising stability. After several iterations I think had a good one.

To get a proper stand for your frame follow the following steps:

1. Measure your frame length.
2. Divide your Frame Length by 3 and then multiply by 2: (FrameLenght/3)*2

i.e. 78.1/3 = 26.03 * 2 = 52.8

3. Use this result in millimeters and use this value in the X axis only and scale the model in your slicer to have an according stand for your stencil. 

*Be sure to uncheck Uniform Scaling.

**Printing Settings:**

- Layer height: 0.2mm or 0.28mm
- Infill: 20%

**Important Note:**

- The gap to hold the frame is 2mm width.

Minimal Frame Stand

Minimal_Frame_Stand_81mm.stl

So I made this Decor of Taylor Swift for my wife. She loves that gal's music so it is a must. Also I am still experimenting with "plotting" with my 3d printer.

The model was designed using a vector based on one of her albums? I believe. Did some cleanup and exported to Tinkercad, added a background and BAM! 

Printing Settings:
- Layer height: 0.2mm
- Infill: 100%
- Monothonic Top/Bottom Order:  **YES **(This is a setting in Cura to avoid lines when the infill is being done). More info [in this link](https://youtu.be/OygRJrpTNC8?si=XNoulx6hjOPXq2AX&t=870)

Taylor Swift Silhouette Decor

Taylor_Swift_Decor.stl

This is an experiment where I am working with 2 colors using cura's extension for post processing "Pause at height". 

This Decor Silhouette of Scarface is from the scene, ["Say Hello to My Little Friend" after he is out of his office and shooting all the Colombians](https://youtu.be/AU5jwUHIgMc?si=dVtwFFxwd_qNI0hM&t=236). 

Also my inspiration comes when[ I saw this "mural" in one scene from the movie War Dogs](https://imgur.com/a/yTNJ5Dd), when the protagonist are in the same office, the mural is hanged in the right side of the wall.

The sample I am posting is scaled to 50%. The original model is 156mmx121mmx2mm, you can easily do this in Cura to save some filament or to your desire.

If you want to know how to switch filament using "Pause at height" extension in Cura, you can find the explanation in the following video: https://www.youtube.com/watch?v=BZeFiAH1-bg

Scarface Silhouette Decor Multicolor

Scarface_Decor.stl

Introducing the pinnacle of 3D-printed innovation: a bespoke palace for your cheap precision-measuring monarch and its loyal battery subjects. Because even a caliper deserves a throne, and batteries need a cozy nook to call home. Marvel at the grandeur of practicality!

The one that Zack has in his gallery didn't fit my cheap caliper, so I MADE MY OWN. Also changed the battery arrange, didn't like the horizontal one.

Gridfinity is an opensource model created by Zack Freedman checkout his official webpage here: https://gridfinity.xyz/catalog/

Print Settings

    Rafts: No
    Supports: Yes
    Resolution: 0.28mm
    Infill: 15% - 20%
    Filament material: PLA

Gridfinity Cheapo Caliper Holder

Grifinity_Cheapo_Caliper_Holder v3.stl

This model is a stand designed specifically for the Huawei Watch GT 2e, ensuring a perfect fit with the charger and keeping it stable on the base. Its design allows for easy removal of the watch when needed. Created in Fusion 360.

**Print Settings**

-    Rafts: No
-    Supports: Yes
-    Resolution: 0.2mm
-    Infill: 20% - 40%
-    Material: PLA

Huawei GT 2e Watch Stand

Huawei GT 2e Watch Stand.stl

The "Gridfinity Cheapo Deburrer Holder," the ultimate Fusion 360 designed, AliExpress-sourced base for the 3D printing enthusiast with a love for the gridfinity system. This piece of... of "you get what you pay for," merging the thrill of DIY with the unpredictability of budget shopping. It promises a world of customization, but it's a gamble whether your printed treasures will align or play a game of hide and seek. Perfect for those who see every misalignment as a chance to innovate or just shrug and try again. The Gridfinity Cheapo Deburrer Holder: where ambition meets budget, beautifully.

Gridfinity is an opensource model created by Zack Freedman checkout his official webpage here: https://gridfinity.xyz/catalog/

Aside my modified parametric source, you can find Zack's in the following link: https://a360.co/3vbu9B5

Print Settings
- Rafts:
    No
- Supports:
    Yes
- Resolution:
    0.2mm
- Infill:
    15% - 20%
- Filament material:
    PLA


Gridfinity Cheapo Deburrer Holder

Gridfinity_Deburrer_Holder.stl

Behold the "Gridfinity Lamp Holder," an inventive creation that screams "AliExpress ingenuity meets midnight oil burning." This 3D-printed fortress for your flashlight stands proudly, a beacon of thrifty design for gridfinity grid enthusiasts. It's compact, it's black, it's got angles that could give a mathematician a run for their money. Perfect for the desktop explorer who likes their light just as focused as their budget. The Gridfinity Lamp Holder: a holder of light, a keeper of coins, and a conversation starter.

Gridfinity is an opensource model created by Zack Freedman checkout his official webpage here: https://gridfinity.xyz/catalog/

Print Settings
    Rafts:
    No
    Supports:
    Yes
    Resolution:
    0.2mm
    Infill:
    15% - 20%
    Filament material:
    PLA


Gridfinity Lamp Holder

Gridfinity_Lamp_Holder.stl

c200_e3s1pro_base.stl

c200_e3s1pro_arm.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Axor

Achievements

Explorer

Novice Maker

Seedling

Debutant

Pinned models

Huawei GT 2e Watch Stand

Alexa Echo 3rd Generation Wall Mount

Tapo C200 Ender 3 S1 Pro Mount

Universal Pump Guard

Tapo C200 Ender 3 S1 Pro Mount

Alexa Echo 3rd Generation Wall Mount

Gauge Print Thickness

Minimal Frame Stand

Taylor Swift Silhouette Decor

Scarface Silhouette Decor Multicolor

Gridfinity Cheapo Caliper Holder

Huawei GT 2e Watch Stand

Gridfinity Cheapo Deburrer Holder

Gridfinity Lamp Holder