AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects
3mf and stl included
Filaments Used: PLA PolyTerra Charcoal Black PLA Creality Hyper White
Note: If you have a Highly Transparent white filament, it'll look closer to the picture posted, but a more opaque white will do fine
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions: Start with Charcoal Black At layer #12 (1.04mm) swap to White for the rest.
.png&w=3840&q=75)
