AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA PolyTerra Charcoal Black PLA Creality Hyper White

Note: If you have a Highly Transparent white filament, it'll look closer to the picture posted, but a more opaque white will do fine

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions: Start with Charcoal Black At layer #12 (1.04mm) swap to White for the rest.