Monochrome Camaro

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA Polyterra Black PLA Creality Hyper White

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Swap Instructions: Start with Black At layer #13 (1.2mm) swap to White for the rest.

Note: If you have a Highly Transparent white filament, it'll look closer to the picture posted, but a more opaque white will do fine