1 Likes4 DownloadsFebruary 6, 2024
AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects
3mf and stl included
Filaments Used: PLA Polyterra Black PLA Creality Hyper White
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Swap Instructions: Start with Black At layer #13 (1.2mm) swap to White for the rest.
Note: If you have a Highly Transparent white filament, it'll look closer to the picture posted, but a more opaque white will do fine
Category:
1 Likes4 DownloadsFebruary 6, 2024
1 Likes4 DownloadsFebruary 6, 2024