The two Split Side Panel parts are optional.

Please visit the blog post for comprehensive 3D printing and assembly instructions.

Recommended slicer settings:

• Nozzle Size: 0.4mm
• Wall/Line Width: 0.4mm
• Perimeter/Wall Count: 4
• Layer Height: 0.2mm
• Top Layers: 6
• Bottom Layers: 6
• Infill Density: 40%
• Brim: Yes
• Supports: No (with the exception of radiator clamp, which requires supports)

Tools and hardware required:

• 3D printer, or access to 3D printing service
• 3D printing filament (ABS or PETG Recommended)
• Ball-end hex driver for blind screws
• Soldering iron with B2 (Conical) tip
• Flush cutters
• M4x12mm SHCS (5 Units)
• M3x10mm SHCS (5 Units)
• M3x10mm BHCS (6 Units)
• M3x8mm FHCS (2 Units)
• M4 heat set inserts (5 Units)
• M3 heat set inserts (13 Units)