2D3D
Makes
Be the first to upload a Make
Print in Place Wavy Stand . This is Fully assembled, works right off the bed.
Print it in standing mode without support, but if you want extra strength you can print it in horizontal mode, but that will require support.
License: Released under CC BY-NC-SA 4.0 creativecommons.org/licenses/by-nc-sa/4.0
Printed at 0.2 mm Layer Height with 15-50% infill.
Category:
4 Likes17 DownloadsMarch 3, 2021
4 Likes17 DownloadsMarch 3, 2021