Pumpkins everywhere!

Enjoy this Pumpkin Box with a twist-lock lid to store your candy… or your favorite articulated prints 😁

Many files available:

*   2 Multicolor versions, with “standard” or “thin” mouth and eyes. Use the thin for translucent filaments if you want to light it!
    
*   2 Different lids, with or without handle. The handle needs some force to be assembled, I recommend pressing it against the table.
⚠️ Please note the lid orientation before assembling the handle if you want it to face forward as in the picture. It's not symmetric. 
    
*   “By parts” version, for single color printers or to leave it as a carved pumpkin.
    
    *   The Pumpkin needs supports on the upper teeth. I suggest painting these supports using the fill tool and setting the tree supports with the “strong” style. The 3MF file includes these supports and the variable layer height. Check the remaining printing settings at your convenience.
        
    *   The Mouth needs a brim (at least 5 mm recommended). It should be assembled from the inside.
        
    *   The eyes fit from the outside, just press them into the holes. There are 2 Eyes versions, one at its original size and one shrank slightly. The original ones worked perfectly with my A1 Mini, but depending on your printer tolerances you may need the other ones. Alternatively, you can adjust the XY compensation in the slicer to achieve the perfect fit for your print.
        
*   A “faceless” version, in case you want to paint your own scary face 🎃
    
[**Check the Full Pumpkin in this video!:** ](https://youtu.be/4zvEJLKPgI4)

**Disclaimer:** Articulated animals are not included.

[**Check here for Commercial License**](https://www.mcgybeer.xyz/commercial-license)

Pumpkin Box

Pumpkin Box thin_v2.stl

**Tiny Rocketman and Spaceship!**

Print-in-place with zero supports!

THINGS TO CONSIDER:

- For single-color printing, use the STL file (no weird gaps).    
- The visor starts printing mid-air over the helmet's inner flat surface, with a 0.2 mm vertical gap (like a removable support). This means:
    - The slicer may warn you about floating regions, but you can ignore it. I'm adding a "head only" test file so you can check this before a long multicolor printing session.
    - Scaling it too much may cause the visor to fail. For that, I recommend printing it apart and assembling it later ("visor " and "visorless" files).
- After printing ([check this video](https://youtube.com/shorts/CpM7tEk7)):
    - You need to firmly push down the visor tab to loosen it the first time. Force may vary between filaments due to differences in adhesion.
    - You have to **loosen the arms BEFORE the legs**. Simply rotate the arms until the legs can wobble. Then you can pull the legs out, and they can lock in place (and still allow a few degrees of articulation).
    - If the legs get stuck, you can use a flat screwdriver or similar to pull the legs using the provided hole at the bottom.
- To sit the Rocketman in the Spaceship, you must retract the legs and rotate the arms forward (as in driving position)
- Pro tips:  
    - The vertical "line" behind the helmet is intended to be used for the seams.    
    - Variable layer height is recommended for the top (the last 5-6 mm for a smooth visor and helmet). For the rest, 0.2 mm layer works great.

I've done several tests, but I foresee the visor causing issues to some people/printers/filaments. For that, I've provided separate files inside the "Visorless" folder. Then you can snap the visor after printing.

There are 3 files for the Spaceship. Among these, the file Spaceship\_v1.3MF has been designed to be printed in multicolor, but using just 5 COLOR CHANGES. The geometry was designed with this in mind, as an attempt to save waste in big multicolor prints. It can even be printed in single-color printers 😁

[**Check here for Commercial License**](https://www.mcgybeer.xyz/commercial-license)


Tiny Rocketman

Tiny Rocketman_v1.6.stl

Short version of my Snakes, exclusive for **Commercial Subscribers!**

STL and multicolor 3MF included (tested with Bambu Studio 1.8.4.51, PrusaSlicer 2.7.4, and OrcaSlicer 2.0.0).

No supports required, but I recommend setting a brim for the Cobra head, especially for multicolor prints. It's a long print and better to be safe.

Short Snakes

Cobra_short.stl

Rattlesnake_short_v2.stl

**The cutest Otter!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).

It is designed with **embedded magnets** to grab a rock and other Otters. Check out this [short video](youtu.be/5D1Jq9cZ3Og) to see it in action.

The Otter and the magnet rock are designed to fit **8x3 mm cylindrical magnets**, and there's a second version of the rock that fits a 10 mm steel ball. Both work great, but the magnet rock has a stronger grip.

Pre-painted 3MF file also included!!

**CONSIDERATIONS:**

-   Obviously, those magnets won't fit if the model is scaled. I've provided a version of the Otter without the magnet holes as well.

-   You will need to add a pause to the print to insert the magnets. It should be done just when the preview shows the first layer closing the hole, so the printer pauses just before that layer starts (about 10.2 mm in height).

-   I recommend placing opposite magnet polarities on each hand and each side of the rock. This way the hands can close together. Additionally, if you use the same configuration on all the Otters they will be able to hold hands 😁

Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license)


Magnetic Otter

Otter_v2.stl

**The cutest Skunk!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).
Pre-painted 3MF file also included!!

Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license)


Articulated Skunk

Skunk_v1.stl

**The cutest Opossum!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).
Pre-painted 3MF file also included!!

Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license)


Articulated Opossum

Possum_v0.stl

Possum_v1.3mf

Possum_v1.stl

**The cutest Foxes!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).
Pre-painted 3MF file also included!!

Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license)

Articulated Fox

Articulated Fox_v1.stl

**The cutest Racoon!!**

Trash can included, their favorite hide spot.

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).
Pre-painted 3MF file also included!!
[Demo video](https://youtu.be/mNYaTHZTzZc)
[Timelapse + postprinting video](https://youtube.com/shorts/wYS_0KdJgzk)

Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license)

Articulated Racoon

Racoon_v3.3mf

Racoon_v3.1.3mf

**The cutest Red Panda!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).
Pre-painted 3MF file also included!!
[Timelapse + postprinting video](https://youtu.be/e35xuyeYpa0)

You can also support my work on [Patreon](https://www.patreon.com/mcgybeer)


Red Panda

Red Panda_v2.stl

**Lazy Moose!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).

After printing the Moose, just move the articulations to get them free.

**Update**: Added a "By parts" version, for those of you not having a multicolor 3D printer. Note the antlers may need brim to be printed properly. After printing, just glue the antlers to the head (check pictures for correct orientation).

[Timelapse + postprinting video](https://youtu.be/b2WljmU1MT0)
[Timelapse + postprinting video 2](https://youtu.be/uKwCqwZ6Pqc)

Lazy Moose

Lazy Moose_v1.1.stl

Lazy Moose_v1.1_Antlers.stl

Lazy Moose_v1.1_Body.stl

Lazy Moose_v1.1_Hooves.stl

Lazy Moose_v1.2_BodyB.stl

**Soft Dinos!!**

Specially designed to be printed without supports, and easy printing with flexible materials. Check here the [printing video](https://youtube.com/shorts/ZYg_YC3jreE) and the [final result](https://youtube.com/shorts/-ROduL2BB6Q).

**3 Different models included!:**

-   Stegosaurus
-   Triceratops
-   Brachiosaurus

**IMPORTANT:** The geometry on the belly has been designed that way to print it without supports, just using bridges. Before printing, check the slicer preview and be sure it looks like the picture that shows the slicer view.

Soft Dinos

Stego.stl

**Multiple Maze Variations Included!!**

I’ve created several mazes using procedural algorithms, so each one is different. Additionally, they can be mirrored in the slicer so you can double the number!

Printed at 100% scale, they are intended for a 10 mm ball. They also include holes for three 6 x 1.5 mm magnets, so two halves can be joined. For this to work, remember to **mirror one of the halves in the slicer!**

The Brain Constellation Maze can be scaled, and the ball used should have a size accordingly to this (for instance, at 80% scale you need an 8 mm ball; at 60% it should be 6 mm, and so on). 

Because the 60% scale is also a great option (you can use standard airsoft BBs, they are 6 mm), I’ve also included all the files resized with the magnet holes properly scaled.

For printing, **DO NOT** use supports or inner brim.

Tip: For a better looking, I recommend printing it with a translucent filament and gyroid infill.

[Brain Constellation Maze video](https://youtu.be/kde3IB5zTt4)

Brain Constellation Maze

Brain_Maze_seedH5.stl

**Also known as McSnowbeer!!**

Print in place body with no supports.
Feel free to scale them up or down as much as you want (the limit is your printer).

All three parts of the body can spin freely!

**Includes 2 snowman models**, one with cute eyes and another one with classic button eyes. After printing all the pieces (body, hat, nose, hands, buttons, and optional eyes) I recommend gluing them. If the accessories are too tight or too loose feel free to adjust either the scale or the XY compensation on the slicer.

Check here the videos!
[Timelapse](https://youtube.com/shorts/fQsXTYMAgYY)
[Assembly](https://youtube.com/shorts/GtXHpMKXgNI)
[Snow!!](https://youtube.com/shorts/KQ0IUdMpw2Y)

Articulated Snowman

Snowman_B_v2.stl

**Lazy Beaver!!**

Print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).

**Includes also 3 wooden log models**. I recommend printing them on a bunch of different sizes.
After printing the Beaver, just move the articulations to get them free.

[Timelapse + postprinting video](https://youtu.be/UTzf7VYZSQ8)

Lazy Beaver

Beaver_v1.stl

**Mouse and Cheese Box!!**

Both are print in place with no support and no assembly required. **Just slice and print!**
Feel free to scale them up or down as much as you want (the limit is your printer).

After printing, just move the articulations to get them free. The Cheese Box has a couple of holes for optional magnets (6 x 1.5 mm at default scale). The Cheese Box joints are meant to be tight. If they are too loose the box doesn't close properly and leaves some gaps. If they are fusing together, that means you are probably over-extruding. There are two ways to fix that:

- The quick fix is to adjust the XY expansion on the slicer, in your case by setting a small negative value (-0,1 or -0,2 should do).
- The not-so-quick fix (and recommended in the long term) is to calibrate your extrusion settings so the real extrusion width matches the slicer values. There are several online tutorials that explain how to do it, it's not that hard.

I've included a test piece, which is just the hinge: Cheese-Test_Joint.stl
This way you can test your new settings without printing the whole Cheese 😉

[Cheese Boxed Mouse](https://youtu.be/Rlszx5iWPaU)
[Timelapse + postprinting video](https://youtu.be/TFb8nuNnM8Q)

Cheese Boxed Mouse

Mouse_v1.stl

**2 Designs included!!**

Print in place with no support and no assembly required.

Different versions included, with or without armor, and also available for MMU.

After printing, just move the articulations to get them free. The legs are able to lock in the upright position for easy posing. Extend them to move, compress them to lock. Check the videos below in case of doubt!

[Timelapse + postprinting video](https://youtu.be/2eWE5eCgPmo)
[Rhino variations video](https://youtu.be/JsYFuw9rD30)


Armored Rhino

Armor_Rhino_v2.stl

**3 years later, the Octopus has grown!**

Print in place with no support and no assembly required.

Available both with smooth and textured skin.
Includes also replaceable tentacles, no need to throw away failed prints! [Check the tutorial video](https://youtu.be/zj3bOYTX1Go).

[Check here the timelapse and post-printing video.](https://youtu.be/zHN_-j0EIdk)

**DISCLAIMER:** This print requires very good bed adhesion for the suckers to stay in place. I recommend disabling any “elephant foot” compensation on the slicer. For more tips, take a look at my [printing tips](https://www.mcgybeer.xyz/printing-tips).

**UPDATE!!:** New version with separate eyes added. I've included also single tentacles to use as keychain.

Octopus 2.0

Octopus_2.0_v1.stl

**Articulated Snake and Rattlesnake!!**

Body printed in one piece, with optional tongue and functional rattle. [Watch here some finished examples](https://youtu.be/SiUXJBqRvSc).

At the original scale they need just  16 X 16 cm to be printed, but they are more than 80 cm long! Of course, they can be printed as big as you want (for smaller prints some articulations may not work as intended).

For belt printers, the articulations work better if the snakes are printed from tail to head.

The tongue and rattle are designed to snap fit, but you may need to adjust a bit the scale of these two depending on your printer tolerances. I recommend printing them separately.

Check here the timelapse and post printing videos of the [Snake](https://youtu.be/T0s86Ez6udA) and the [Rattlesnake](https://youtu.be/4IJbz-C2iBo).

**(*) Skull not included**. It is an authorized modification from Fynngro’s Skull used as decoration (https://www.instagram.com/fynngb/)

Snake and Rattlesnake

Snake_v1_Curled.stl

**Print-in-place Articulated Dragon!!**

Huge, very flexible, and printed in one piece without supports. Just the mustache needs to be assembled after printing ([see video example](https://youtu.be/le-ucwUBw5E)).

It can be scaled up or down as much as you want (the limit is your printer capabilities).

For resin printing, check out [Uncle Jessy's video](https://www.youtube.com/watch?v=JnKtPg0BEhs) with lots of tips and recommendations.

For delicate prints, such as tiny sizes, metal sintering or just if you need extra strength for the horns, I've added the "Short Horns" version.

[Video](https://youtu.be/uSrJmNybCMg)

Articulated Dragon

Dragon_v2.stl

3 Happy Beetles!! Articulated and ready to fly. 

Includes:

- Rhino Beetle (Hakuna Matata)
- Stag Beetle (with gear-articulated tweezers)
- Hercules Beetle (with pre-made support for the horn)

**No additional supports required. Just slice and print!!**

After printing ([Rhino](https://youtu.be/i5P_1wRYi8s) / [Stag](https://youtu.be/oxBlr3zOoys) / [Hercules](https://youtu.be/A8Uj0naK9vU)):

Carefully remove the tabs on the wings and press from the back to open them. The Hercules Beetle includes pre-made support for the horn. Just remove it with care.

Happy Beetles

Beetle_Rhino_v2.stl

A full Horse family, including 4 different designs!!!

- Horse
- Unicorn
- Pegasus
- Flying Unicorn

All of them include a version with printing tabs to help with bed adhesion.

The Unicorn and Flying Unicorn can be printed at once or without a horn, so you can print it in a different color.

They can be scaled up or down with no issues (it's up to your machine's size and resolution).

**No additional supports required. Just slice and print!!**

After printing ([video1](https://youtu.be/EVdwObWmtW8) [video2](https://youtu.be/mkwLRTptgns)) just remove the tabs (if you chose that version) and carefully rotate the legs to free them.

[Video](https://youtu.be/skE9RR_pWcA)

Lazy Horses

Lazy_UniPegasus_v1.stl

Endless colors for the cutest 3D printed Ladybug!

It can be scaled up or down with no issues (it's up to your machine's size and resolution).

**No additional supports required. Just slice and print!!**

After printing, just cut some raw filament and use it as antennas ([Post printing video here](https://youtu.be/LUs5AKvQv0E))

[Video](https://youtu.be/BPuVep6bZ5Q)

Lady B

LadyB_Body_v1.stl

How long can you print this Dino?

**No supports required. Just slice and print!!**

After printing, just move the articulations and assemble the tail ([Post printing video here](https://youtu.be/Vh_yflrPcZs))

**UPDATED V3!!**
Now includes auto-lock articulation on the legs, so it’s way easier to keep it upright!
([V3 Post printing video](https://youtu.be/u22zlvmKNDA))

Arti-Brachi

Brachi_v3_body.stl

Lazy Dogs!! Not only one, but 3 different models!

**No supports required. Just slice and print!**

After printing, just move carefully all the articulations to completely free them.

[Video](https://youtu.be/pubsmwoeDkM)

Lazy Dogs

Lazy Dog-Dalma_v0.stl

The coolest Stegosaurus around there!!

Several options for printing:

- All in one piece.
- Separate plates for post-printing assembly ([assembly video](https://youtu.be/p2ar4fl9nXw)).

**No supports required. Just slice and print!!**

**UPDATED V2!!**
Now includes auto-lock articulation on the legs, so it’s way easier to keep it upright!
([V2 Post printing video](https://youtu.be/-g0C2MXOL9c))

Arti-Gosaurus

Arti-gosaurus_v2.stl

This Triceratops is the perfect companion for the Ar-T-Rex, isn't it?

**No supports required. Just slice and print!**

[Video](https://youtu.be/FF5UQ3haZjk)

Ar-Triceratops

Triceratops_v2.stl

The most aggressive T-rex you will ever find!!!

Well... maybe not.

**No supports required. Just slice and print!**

[Video](https://www.youtube.com/watch?v=gqro5YRunTQ)

Ar-T-Rex

If you want to rest on vacation, learn from this Articulated Manatee!

**No supports required. Just slice and print!**

[Video](https://www.youtube.com/watch?v=lSYPXBxnolY)

Articulated Manatee

Looking forward to swimming this summer, here it is the Articulated Dolphin!

**No supports required. Just slice and print!**

[Video](https://www.youtube.com/watch?v=JFyOXYlMN6s)

Articulated Dolphin

Look who has arrived! The Articulated Bunny!

**No supports required. Just slice and print!**

[Video](https://www.youtube.com/watch?v=Hziq8NbNA8I)

Articulated Bunny

**No supports or assembly required. Just slice and print!!**

Version v2 improves the jaw joints, now stronger.

[Video](https://youtu.be/3ZtwMmo9m8Y)



Phone Eater Baby Dragon

Another reptile joins the articulated family!

**No supports required. Just slice and print!!**

[Video](https://www.youtube.com/watch?v=FY6G3yJzAgU)

Articulated Alligator

Alligator_v2_curl.stl

Let this cute Articulated Piggy join your family!

**No supports required. Just slice and print!!**

[Video](https://www.youtube.com/watch?v=sIK0cxuFUA8)

Articulated Piggy

Let this cute Articulated Piggy join your family!

**No supports required. Just slice and print!!**

Perfect Roach for pranks! It moves like a real one.

**No supports required. Just slice and print!!**

After printing ([see video](https://youtu.be/gda0YsvIzkI))

Articulated Roach

Cockroach_v1.stl

The cutest and laziest Reindeer you will see!

**No supports required. Just slice and print!!**

After printing, just move carefully all the articulations to completely free them.

[Video](https://www.youtube.com/watch?v=Lrd1ar4jgX8)

Lazy Reindeer

Reindeer_v1_MMU.3mf

The cutest articulated elephant, the Flexiphant!

**No supports required. Just slice and print!!**

Optionally, you may add a 1 mm diameter metal wire, to set a pose ([tutorial here](https://youtu.be/qSpG8hOxHfQ)).

**BONUS!!** Give your Flexiphant a ball to play with. Just print two parts with different colors, remove the included printing tabs and press-fit them together.

[Video](https://www.youtube.com/watch?v=2dkUr0PVzy4)

Flexiphant

Flexiphant v4.stl

Creepy Articulated Tarantula!!

**No supports required. Just slice and print!!**

Many versions available:
- **NEW Tarantula_v3_baseD.stl**: Built in breakable supports for high speed 3D printers.
- Tarantula_v2_baseA.stl: Includes easy-to-remove bases on both sides of the legs, for easier printing. After printing, just remove carefully the leg tabs (see postprinting video).
- Tarantula_v2_baseB.stl: Includes easy-to-remove bases on the legs, just on the tips.
- Tarantula_v2_baseC.stl: Includes full base for maximum bed adhesion.
- Tarantula_v2.stl: Original tarantula without base tabs (you may need raft or brim for the legs to stick correctly on the bed).

[New v3 Base D video](https://youtu.be/0-yQcrhssw8)
[Original video](https://www.youtube.com/watch?v=0gKuQxse1_A)

Spare legs also included!

Articulated Tarantula

Tarantula_v2.stl

Tarantula_v3_baseD.stl

Tarantula_v3_baseD.3mf

Tarantula_v3_baseD_MMU.3mf

Leg_v2.stl

Leg_v3.stl

Happy Articulated Crab!!

Fully articulated legs, and functional claws.

**No supports required. Just slice and print!!**

[Video](https://www.youtube.com/watch?v=jkWya1YFRiY)

Articulated Crab

Crab_v4-BigBaseFull.stl

The laziest Articulated Cat!

**No supports required. Just slice and print!!**

After printing, just move carefully all the articulations to completely free them.

[Video](https://www.youtube.com/watch?v=fBgikauUv1k)


Lazy Cats

Lazy_Cat_v4.stl

If you want a **License to sell** prints of my designs, this is the tier you are looking for.
It includes **4 downloads/month**, ready to go!
Check here the full terms: [License Agreement - Terms of Use](https://drive.google.com/file/d/1xPQQRbTNV7LVokDdRkDUIlZWVlu8dXJx/view?usp=sharing)
In short:

- This Tier grants you the right to sell prints of any of my designs while your subscription is active. For Canada and Russia explicit authorization is required (check the agreement for details).
- You may not sell, share or redistribute digital files of my designs.
- You may not modify the original files without my express authorization.
- You must give proper design attribution.
- You accept the [License Agreement - Terms of Use](https://drive.google.com/file/d/1xPQQRbTNV7LVokDdRkDUIlZWVlu8dXJx/view?usp=sharing)

Commercial License - Ready to go

If you want a **License to sell** prints of my designs, this is the tier you are looking for.
Check here the full terms: [License Agreement - Terms of Use](https://drive.google.com/file/d/1xPQQRbTNV7LVokDdRkDUIlZWVlu8dXJx/view?usp=sharing)
In short:

- This Tier grants you the right to sell prints of any of my designs while your subscription is active. For Canada and Russia explicit authorization is required (check the agreement for details).
- You may not sell, share or redistribute digital files of my designs.
- You may not modify the original files without my express authorization.
- You must give proper design attribution.
- You accept the [License Agreement - Terms of Use](https://drive.google.com/file/d/1xPQQRbTNV7LVokDdRkDUIlZWVlu8dXJx/view?usp=sharing)

This Tier includes just **one download/month**. For additional downloads, check the other Tiers.

Comercial License

If you want a **License to sell** prints of my designs and/or access all of them, this is the tier you are looking for!
It includes **immediate and unlimited access to all my designs**.
For Commercial Use, check here the full terms: [License Agreement - Terms of Use](https://drive.google.com/file/d/1xPQQRbTNV7LVokDdRkDUIlZWVlu8dXJx/view?usp=sharing)
In short:

- This Tier grants you the right to sell prints of any of my designs while your subscription is active. For Canada and Russia explicit authorization is required (check the agreement for details).
- You may not sell, share or redistribute digital files of my designs.
- You may not modify the original files without my express authorization.
- You must give proper design attribution.
- You accept the [License Agreement - Terms of Use](https://drive.google.com/file/d/1xPQQRbTNV7LVokDdRkDUIlZWVlu8dXJx/view?usp=sharing)

This Tier includes **unlimited downloads**. For different number of downloads, check the other Tiers.

Commercial License - No Jokes

Do you desperately need lots of designs to print? Then this is your plan! Download **up to 8 designs per month** and enjoy the variety of models available 😁

**NOTE:** This is not a commercial license tier. All the downloaded files are for personal and non-commercial use only. Additional info on my website (www.mcgybeer.xyz).

Give me more!

Do you like my designs?
With this plan you can download **up to 4 designs** each month. That's a lot of articulations! 😁
You may discover some designs that went overlooked in the past, but I'm really proud of each one of them.
Enjoy!

**NOTE:** This is not a commercial license tier. All the downloaded files are for personal and non-commercial use only. Additional info on my website (www.mcgybeer.xyz).

McGybeer

Achievements

Fan Favorite

Sapling

Trailblazer

Rising Star

Pinned models

Articulated Dragon

Snake and Rattlesnake

Octopus 2.0

Pumpkin Box

Tiny Rocketman

Short Snakes

Magnetic Otter

Articulated Skunk

Articulated Opossum

Articulated Fox

Articulated Racoon

Red Panda

Lazy Moose

Soft Dinos

Brain Constellation Maze

Articulated Snowman

Lazy Beaver

Cheese Boxed Mouse

Armored Rhino

Octopus 2.0

Snake and Rattlesnake

Articulated Dragon

Happy Beetles

Lazy Horses

Lady B

Arti-Brachi

Lazy Dogs

Arti-Gosaurus

Ar-Triceratops

Ar-T-Rex

Articulated Manatee

Articulated Dolphin

Articulated Bunny

Phone Eater Baby Dragon

Articulated Alligator

Articulated Piggy

Articulated Roach

Lazy Reindeer

Flexiphant

Articulated Tarantula

Articulated Crab

Lazy Cats