Updated! Multicolor 3MFs now included in multiple variations:

• 4 Color: best for most multicolor printers
• 5 Color: great for 5 color printers
• 7 Color: Even more color details for those with higher multicolor capability! (closest match to my hand painted sample) -All 3MF files offer both “Clean” and “withScuffs” versions.

I hope you enjoy my RoboLotl - the Robot Axolotl. I wanted to create a special Anniversary Edition Axolotl to celebrate one year since the release of my first Axolotl and the beginning of my 3D print design journey. I love Sci-Fi, so a robot axolotl was a natural choice! Please, share photos of your makes! I would love to see them!

Here is a quick video showing the easiest method for removing the Head Pre-Supports and Snap-Fitting the Head onto the Body: Watch Here

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

Printing Details

• Head: Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
• Body_preSupportAndBrim (recommended): Print-In-Place. Pre-Supported for easy printing. No additional support needed.
• Optional: Alternative Body files with no presupport (presupported version recommended)
• Multicolor 3MFs: multiple versions optimized for how many colors you want.
• -Compatible with PrusaSlicer, Bambu Studio, Orca based slicers (for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)
• -4 Color: best for most multicolor printers
• -5 Color: great for 5 color printers
• -7 Color: Even more color details for those with higher multicolor capability!
• -All 3MF files offer both “Clean” and “withScuffs” versions.
• No supports
• 10%-15% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)
• This should generally scale down to about 75% with full articulation, on a well calibrated printer. Your mileage may vary.

If you want to experiment with altering the 3MFs to add more color variation, I encourage you to check out THIS VIDEO for some tips and tricks!

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.