Introducing my Rhinoceros design!!

It's mostly print-in-place, but a couple of snap-fits for the head and tail and you're ready to go! Here's a Demo Video that shows the assembly!

Multicolor 3MF included (Compatible with PrusaSlicer, Bambu Studio, Orca Slicer, etc.)!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe Membership also includes Exclusive Designs, Bonus Files, and Discounts on older files!

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Visit my Amazon Storefront for links to the Filaments & Equipment I used. . . PRINTING DETAILS

• Body: Print-in-place
• Head: Snap-fit to Body using Connector.
• Connector: Use to connect the head to the body.
• Multicolor 3MFs: (Compatible with PrusaSlicer, Bambu Studio, Orca based slicers) If you have a 5 color printer, my suggestion would be to add a brown to swap in for the tail hair and the irises.
• No supports
• 10%-15% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)
• This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

Check out a quick assembly Demo Video !

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.