I hope you like my new Ferret design! This fella has a new feature that adds another level of fun and posing, belly muscles! Well, not really... but if you simply add a rubber band to special channels along it's belly, it adds the tension needed to keep him standing with his belly off of the ground, yet he still remains super-flexible! Please watch This Video for a demonstration of the model and the proper way to string up the rubber band (it needs to be twisted between each link to work correctly).

In addition, he comes with optional belly extension links, so that you can make your Ferret belly as long as you want! I personally prefer one added extension. They come in two version, style A and B. Both are functionally identical, but have slightly different texturing so that the fur pattern doesn't repeat.

*Updated: Newer Multicolor 3MF with more fur pattern detailing.

Please, share photos of your makes! I would love to see them!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law.Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon! . . PRINTING DETAILS A few of the parts have small connective "anchors" on the first layer to help with bed adhesion. You will need to trim them away before adding the rubber bands.

I use size #12 rubber bands (same size as used in my Bat design), like these here.***

• Head: Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed. Remove the neck clip pre-support after printing.
• BodyFront: Print-In-Place. Snap-Fit to BodyRear or Extensions.
• BodyRear: Print-In-Place. Snap-Fit to BodyFront or Extensions.
• ExtensionA & ExtensionB (optional): Make the body longer by inserting these in between BodyFront and BodyRear! The only difference between the two is the fur texture, so that you can avoid a repeated fur pattern.
• Tail: Snap-Fit to BodyRear.
• Multicolor 3MFs: Compatible with PrusaSlicer, Bambu Studio, Orca based slicers. (for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)
• 5%-15% Infill.
• 3 Walls.
• This should generally scale down to about 65% with full articulation, on a well calibrated printer. YMMV

Please watch This Video for a demonstration of the model and the proper way to string up the rubber band.

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

***Paid Link. As an Amazon Associate I earn from qualifying purchases.