Teeny Filament Spool
This Teeny Spool can be used to store the remainder of a larger spool, so you can use the original for filament refills. Useful if you often hold on to the tiny last bit of any filament. A small solution for a small problem!
The teeny spool features two halves that screw together securely. Made to hold a standard 82.5mm ID cardboard core, as used by Bambu Lab, The Filament, Polymaker, etc... You can also hold loose filament, but anything more than a few meters risks tangling.
The spool edge is lined with angled holes that securely hold 1.75mm filament to prevent tangling.
For use with AMS, or other systems that hold the filament on the outer edge, print 2 of the Expansion Rails, which snap onto either side of the Teeny Spool.
Printing Guidelines
Settings aren't critical, but I went with these:
- 0.16mm layer height
- 'Arachne' Wall Generator
- Check 'Only one wall on first layer'
- 2 Wall loops
- 6 top, 4 bottom solid layers
- 15% gyroid infill
Teeny Filament Spool
EZPZ Pot Spacers // Airflow and Drainage for Plants
EZPZ TPU Cable Clip Collection // Quick, Flexible, Cable Clips
EZPZ Dummy Nail // Damage Free Wall Hanger Collection
EZPZ Wall Hooks Collection // 17 Variations (and counting!)
EZPZ Shelf Hook Collection // Type 1
EZPZ TPU Cable Clip (4mm)
Caliper Undercut Gauge Adaptors
EZPZ Wall Hook // Type A 36mm
EZPZ Small Shelf Hook // Type1
EZPZ Tube to Wall Mount
Moss Dish/Frame for 100mm Chunky Puck Drip Tray
IKEA Bekväm TPU Feet // Floor Protectors + Grip
Sink Brush Hanger // TPU Brush Loop Kitchen Organizer
SHIMMER 03 Planter
SHIMMER 02 Planter
SHIMMER 01 Planter
EZPZ PS5 Controller Wall Mount
Cloud Dish/Frame for 200mm Chunky Puck Drip Tray
Chunky Puck Drip Tray // 200mm
