Psykedelisk Vase
The Psykedelisk Vase is twisted and warped is such an extreme way that it might make you question your sanity! The big rounded stacks flow in a super satisfying manner, making this a bold show piece.
Printing Guidelines
Due to many shallow curves and somewhat steep overhangs, this vase will benefit from lower layer heights. I used 0.16mm height with Variable Layer Height (adaptive and smoothed) down to 0.08mm, as well as fuzzy skin on contours (0.3mm point distance, 0.6mm skin thickness). Printed solid with Arachne Wall generator. With all these things combined it becomes a rather long print (nearly 24 hours at full scale!), but if you pull it off the result is well worth it!
I also used a Silk Dual PLA similar to this one* for the extra flashy color change effect.
These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.
Psykedelisk Vase
EZPZ Screwdriver Bit Clip
IKEA FLISAT Bench TPU Feet // Floor Protector + Grip
EZPZ Pot Spacers // Airflow and Drainage for Plants
EZPZ TPU Cable Clip Collection // Quick, Flexible, Cable Clips
EZPZ Dummy Nail // Damage Free Wall Hanger Collection
EZPZ Wall Hooks Collection // 17 Variations (and counting!)
EZPZ Shelf Hook Collection // Type 1
EZPZ TPU Cable Clip (4mm)
Caliper Undercut Gauge Adaptors
EZPZ Wall Hook // Type A 36mm
EZPZ Small Shelf Hook // Type1
EZPZ Tube to Wall Mount
Moss Dish/Frame for 100mm Chunky Puck Drip Tray
IKEA Bekväm TPU Feet // Floor Protector + Grip
Sink Brush Hanger // TPU Brush Loop Kitchen Organizer
SHIMMER 03 Planter
SHIMMER 02 Planter
SHIMMER 01 Planter
EZPZ PS5 Controller Wall Mount
