The PLEIADES Collection features elegant and minimal forms with facetted stripes that add strength as well as a beautiful appearance.
PLEIADES 002 can function as a planter, a vase, or other multipurpose container. 160mm tall and about 160mm in diameter.
This series of prints is designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a 0.8 mm extrusion width (even with a 0.4mm nozzle).
Make sure your slicer is not set to close small gaps. In BambuStudio and Cura I set the 'Slice gap closing radius' to 0 mm
For the 'hole' version, adjust bottom solid layers to be 1.2 mm thick (or the maximum number of layers before the hole is covered). Of course you can also print the standard version and drill drainage holes into the bottom after printing. No top layers.
Photographed model was printed on the QIDI Q1-Pro 3D Printer using Bambu Lab PLA-CF filament.*
Also pictured is my 170mm Light Floating Drip Tray
These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.