MERIDIAN 001 is a lovely stout pot divided through the center. Pair the design with a filament swap for a striking piece that will surely make both you and your plants happy. BONUS: You can always use these pots as containers for other purposes. Scale as you wish to suit your needs :)
This pot includes a drainage hole on the bottom for growing live plants and pairs well with my 200 mm Floating Drip Tray to allow for excess runoff.
There was initially a glitch exporting the STL which caused some extra artifacts on the bottom half of the photographed model. I've since fixed that, but included 'MERIDIAN_001_old.stl' as well in case you like that look.
Printing Guidelines Default print settings should work fine, though you may want to increase wall/shell count to help with water tightness. I used 3 shells, 8 solid top layers, and 15% gyroid infill at 0.16 mm layer height.
Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab Matte PLA filament (and translucent PETG for the top half of the scaled down example).* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!