The Glimpse stand features an oblong ovaloid with two sides cut away to reveal it's hollow shape. Complete the display with a beautiful flower, dried plant, feather, incense, etc..

4 versions are included with varying hole widths for your stick and each side is 70mm wide. Hole sizes are 1mm, 2mm, 3mm, and 4mm. The top hole is 5mm in diameter. The hole has a cone at the bottom to help friction fit whatever you stick inside, but depending on the object you might use putty or glue to help with arranging your display.

Printing Guide

This model prints on its side and requires no supports. Depending on your bed adhesion, you may want a decent brim. Your default print settings should work fine! I used 0.16mm layer height

The download includes a 'split' version of the stand, so you can apply different print settings to each half. In the pictured model I used the 'Fuzzy Skin' setting on the 'top' part only with 'point distance' of 0.3mm and 'skin thickness' of 0.3mm. The textural contrast between the two sides adds further visual interest to the piece.

Photographed model was printed using Fillamentum Extrafill PLA Traffic White also available at 3DJake and MatterHackers. Printer was the QIDI Q1-Pro 3D Printer*

These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.