Giant Springo Door Stop
This is an obscenely large Springo door stop that you probably shouldn't print... but also, I couldn't stop myself so who am I to judge?
The springo itself is printed solid and uses a ton of material. The base can have 15% infill or so, but at least 6 shells so it can handle peak wobble forces. Tip is TPU to gently stop doors, as are the insert and the grip. The insert must be oriented so to be vertical, so the door stop stays upright in its resting position. The grip goes between the base and your wall so it won't unscrew itself. Use a standard woodscrew to mount the base and grip to the wall, screw the insert and tip onto the springos, and screw that all onto the base. ...again, this is very over the top for the result and I put way too much effort into it.... but it does actually work as a door stop!
Giant Springo Door Stop
EZPZ Pot Spacers // Airflow and Drainage for Plants
EZPZ TPU Cable Clip Collection // Quick, Flexible, Cable Clips
EZPZ Dummy Nail // Damage Free Wall Hanger Collection
EZPZ Wall Hooks Collection // 17 Variations (and counting!)
EZPZ Shelf Hook Collection // Type 1
EZPZ TPU Cable Clip (4mm)
Caliper Undercut Gauge Adaptors
EZPZ Wall Hook // Type A 36mm
EZPZ Small Shelf Hook // Type1
EZPZ Tube to Wall Mount
Moss Dish/Frame for 100mm Chunky Puck Drip Tray
IKEA Bekväm TPU Feet // Floor Protectors + Grip
Sink Brush Hanger // TPU Brush Loop Kitchen Organizer
SHIMMER 03 Planter
SHIMMER 02 Planter
SHIMMER 01 Planter
EZPZ PS5 Controller Wall Mount
Cloud Dish/Frame for 200mm Chunky Puck Drip Tray
Chunky Puck Drip Tray // 200mm
i need to use vase mode of cura ? and if yes what is the name of the vase mode on cura ?
No vase mode for this model... it takes a lot of material :'|