Folding Dice 30mm D6
Here's an old model I recently dusted off (I used modifiers to make some weighted dice for a classroom statistics excercise). These dice print flat and are then folded and snap together to form a well balanced die. This also makes it possible to color the dots with a single extruder printer using multipass printing as well as saving filament as a multicolor print. The download also includes a single color version and a blank die for you to customize (edit the model or just write directly on the print!)
You can find the smaller 16mm version here.
For best results, assemble right after printing or let the part warm up on the buildplate so the live hinges fold easily. Try to snap all the parts together at once to reduce the chances of breaking any of the inner connectors... the likelihood of this depends on the filament, but the good news is even with one or two broken connectors, the dice still hold together. The snaps are fairly tight and not designed for repeated unfolding once assembled.
0.16-0.2mm layer height, 0% infill, 3 shells (or at least make sure the snap connectors print solid).
Folding Dice 30mm D6
30mm to 40mm Pendant Light Adaptor
30-60-90 Drafting Triangle // 6 inch + 150mm Version
Drafting Triangle Collection
JUMBO Stacking Sieves // Supersized Stackable Sift Collection
Gutter Guard // Rain Gutter Debris Filter
EZPZ Screwdriver Bit Clip
IKEA FLISAT Bench TPU Feet // Floor Protector + Grip
EZPZ Pot Spacers // Airflow and Drainage for Plants
EZPZ TPU Cable Clip Collection // Quick, Flexible, Cable Clips
EZPZ Dummy Nail // Damage Free Wall Hanger Collection
EZPZ Wall Hooks Collection // 17 Variations (and counting!)
EZPZ Shelf Hook Collection // Type 1
EZPZ TPU Cable Clip (4mm)
Caliper Undercut Gauge Adaptors
EZPZ Wall Hook // Type A 36mm
EZPZ Small Shelf Hook // Type1
EZPZ Tube to Wall Mount
Moss Dish/Frame for 100mm Chunky Puck Drip Tray
IKEA Bekväm TPU Feet // Floor Protector + Grip
