Keep your cables where you need them with these super quick, simple, and effective EZPZ Cable Clips! These single part prints take advantage of flexible TPU filament to easily flex open, while the geometry holds things in place during regular use.

This collection features a variety of shapes, strengths and sizes to suite your specific needs. The regular strength versions work well for most general cases, while the 'beefy' clips offer a more secure hold. The 'lite' clips are more gentle, so you can release the cables with a tug. Sizes range from 4mm to 12mm, indicating the maximum diameter of cables suggested for each clip. You'll also find 'wide' clips, great for holding several cables in one spot, or just for some extra slack. Hold cables, string lights, plants, decorations, and more!

Try the standard 4mm clip for free here!

Printing Guidelines

• Designed for use with TPU 95A, or similar flexible filaments. Individual filament properties may affect the strength of each clip.
• 0.16mm - 0.24mm layer height, 2 shells/perimeters, 100% infill
• For best results, use seam painting to place the seam along the inside bottom of the clip

After printing, apply 20mm/0.75" acrylic tape* or similar to the bottom. For a more permanent hold, you might use VHB tape. Hot glue also works on appropriate surfaces.*

Photographed models were printed using Elegoo TPU 95A (also on Amazon), eSun TPU 95A (also on Amazon), and BambuLab TPU 95A HF.

*These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!