tracking pixel
Brian H

Grid Pendant Light

by
LoftedGoods
Follow
Follow
Remix Model
LoftedGoods
LoftedGoods
|
Image 3 of 5
Grid Pendant Light 3d model
LoftedGoods
LoftedGoods
|
Image 3 of 5
Grid Pendant Light 3d model
2D
3D
Makes
Grid Pendant Light 3d model
Grid Pendant Light 3d model
Grid Pendant Light 3d model
Grid Pendant Light 3d model
Grid Pendant Light 3d model
This model is restricted by licensing terms. 

I'm realizing most of my planter designs would also make great pendant lights, so here's a pendant light version of the Grid!

This one does not work out in vase mode, so it needs to be printed normally with an infill. I used a 15% grid infill and 2 walls.

Note that you must only use LED bulbs (9 watts max) as traditional bulbs can get pretty hot and could cause damage to the plastic. I like multi color smart bulbs that I can control with my phone, but any standard 9W LED bulb will do.

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the pendant light socket.

Orientation Should be oriented with the open side facing up.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware

  • Overture Matte White PLA
  • Pendant lights - these come in a pack of three in black or white

Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/


70 Likes499 DownloadsMarch 11, 2024


70 Likes499 DownloadsMarch 11, 2024
This model is restricted by licensing terms.