tracking pixel
Tobias A

LK Uni V2 Tool

by
Lemuren
Follow
Follow
Remix Model
Lemuren
Lemuren
|
Image 3 of 5
LK Uni V2 Tool 3d model
Lemuren
Lemuren
|
Image 3 of 5
LK Uni V2 Tool 3d model
2D
3D
Makes
LK Uni V2 Tool 3d model
LK Uni V2 Tool 3d model
LK Uni V2 Tool 3d model
LK Uni V2 Tool 3d model
LK Uni V2 Tool 3d model

Tool to add or remove the internal nut for LK Systems Väggdosa. Consider it a printable copy of LK Unigrip V2 with RSK 1882695 https://www.lksystems.se/sv/produkter/universal/monteringsdetaljer/ovrigt/lk-verktyg-vaggdosa-unigrip-v2-77797690/

Model shown in picture is printed with 0,4mm layer height with 40% infill (cubic). You can print it in 0,2mm if you are not in a hurry as it will give a bit better results. I would suggest to print the top 8mm as a solid (can be adjusted in Cura via "top layers")


0 Likes2 DownloadsFebruary 27, 2024


0 Likes2 DownloadsFebruary 27, 2024