Tool to add or remove the internal nut for LK Systems Väggdosa. 
Consider it a printable copy of LK Unigrip V2 with RSK 1882695
https://www.lksystems.se/sv/produkter/universal/monteringsdetaljer/ovrigt/lk-verktyg-vaggdosa-unigrip-v2-77797690/

Model shown in picture is printed with 0,4mm layer height with 40% infill (cubic). You can print it in 0,2mm if you are not in a hurry as it will give a bit better results. I would suggest to print the top 8mm as a solid (can be adjusted in Cura via "top layers")

LK Uni V2 Tool

LK Uni V2 Tool.stl

A guide 3D printed guide for doing "turns" in an LK heated floor with 200cc. To be used with a 20mm, 19mm or 3/4" router bit. Designed for use with Makita RP1110C but will work with any router where the distance from the edge of the plate to the centrum of the bit is ~55mm

LK Floor Heating 200mm Router Guide (without bearing)

Design based on https://www.thingiverse.com/thing:4923904

To be used with B-57336 blade that comes with the EU version of the DSP600ZJ tracksaw

Tracksaw jig for waste side cuts 1.45mm

A guide 3D printed guide for doing "turns" in an LK heated floor with 200cc. To be used with a 20mm, 19mm or 3/4" router bit fitted with a bearing.

LK Floor Heating 200mm Router Guide

Replacement dimmer knob for Eljo Trend. Fits 4mm shaft as in the Eljo Trend and maybe other dimmers as well.

Eljo Trend Dimmer Knob

Eljo Trend Dimmer Knob v3.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Lemuren

Achievements

Seedling

LK Uni V2 Tool

LK Floor Heating 200mm Router Guide (without bearing)

Tracksaw jig for waste side cuts 1.45mm

LK Floor Heating 200mm Router Guide

Eljo Trend Dimmer Knob