Tin container
A fun little tin container!
I made two versions of the tin container, one with a label and the other is a plain version!
⚙️Slicer Settings
-
3 walls, 15% gyroid or 3D honeycomb infill, no supports required
-
If you are finding the lid to be tight, try opening and closing it several times to loosen it up, if it's still too tight scale down 0.5% - 1%
Editing 3MF
- Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.
This drop contains just the tin container, for the piggies check out the piggy boops release. + + ⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
I do not use AI in ANY part of my design process. All of my designs are human made™
📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌






















![[updated] Klickers 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2F9973a6b4-3ab1-4feb-8ad3-4f91fc42ad24%2FKlickers%2520(1).png&w=3840&q=75)


.png&w=3840&q=75)
