This is a gridfinity compatible spring loaded component holder. It comes with two arm versions, one with a printed head on it and the other with a hole to thread an M3 bolt in. For the hinge an M3x12mm bolt is used although a longer one can be used as well, in order to ensure the hinge is smooth you can drill one side of the base (not both, one side the bolt has to be able to thread into) and the arm hole with a 3mm bit. As for the spring anything within the following parameters will work, spring strength is mostly based on user preference. Spring ID should be at least 3mm, the OD no more than 10mm and the length at minimum 25mm. Happy Printing!
Category:
17 Likes24 DownloadsJune 3, 2023
17 Likes24 DownloadsJune 3, 2023