MultiBoard Gridfinity Shelves
Welcome to the MULTIVERSE!
Bringing together two amazing organizational systems, Multiboard and Gridfinity - easy to install, incredibly strong shelves that attach with Multiboard T-Bolts! In 4 sizes for you to explore!
Files Included: 3 Shelf Sizes: 1x2 - 2x3 - 2x4 - 2x5 Included a T-Bolt, and MultiTool (by Keep Making for convenience)
Multiboard Printing Guidelines: The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm.
This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.
Explore and build the coolest, most adaptable workshop at https://multiboard.io
Inspired by the gridfinity baseplate from Daboo.
MultiBoard Gridfinity Shelves
Gridfinity Magnetic Baseplates - Assortment
Chicago Bears - Iceman Caleb Williams "The Throw"
MultiBoard Gridfinity Shelves 3x4, 3x5, 2x6, 3x6
Pro Streamer - BigTreeTech Panda Touch
Skull - Hueforge
MakerChip Matrix
MakerChip Transporter 500 - Polymaker Insert
Printy Panel Hooks (Small - Medium - Large)
MultiBoard Gridfinity Shelf 2x2
MakerChip Insert CAP - Minimal Storage Solution
MultiBoard Pen_, Pencil, Marker
MakerChip - Maker Chip - The New Maker Coin
MakerChip Storage & Display Box
Halloween Peep Collection
Multiboard Cable Clip
MultiBOOM 3/8 Adapter
MultiBOOM 1/4-20 Adapter
MultiBOOM Clamp
MultiBoom Phone Holder / Mount - Multiboard
I printed the 4x2 shelf.
Magnets do not fit.
Gridfinity specifies 6mm x 2mm magnets. The holes in the file are defined as 6mm x 1.7mm. Allowing for tolerance, i.e. variations in magnet, filament shrinkage, and printer, the holes should be 6.2x2.2.
I’ve printed three of these shelves and they are great. I really like the sturdiness of the small thread bolt mount to the multi board. I ordered 6 x 2 magnets and they are not fitting in the shelf holes. Was it designed for 6 mm or should I get five?
The OP specified 6x1.7 holes in the part I measured, and should have specified at least 6.2x2.2. You could get 5.5x1.5 magnets, but I would enlarge the holes, so as not to deviate from the standard, which may cause problems later when you add more parts.
I can't find those anywhere. :(
cheap amazon magnets that are labeled 6x2 are often much thinner.
Any chance you can make a 2x6 size?
Agreed. I need a 2x6 size for my 10x10 multiboard panels. My design skills are horrid; I haven't been able to figure out how to remix the 2x5 to add an extra section and mounting hole to it.
2x6 is complete, test printing and posting today if all goes well.
Where can I find the updated models
Hi! This model is awesome, thank you! Would be really nice if you released a version with shelves that are three and four squares deep!!!
Like I said, really nice model!!!
Coming right up!
It would be great if these could be supported by Multiboard Brackets... sadly, they do not align as the shelf is not parallel to the bolts
I looked through your models but couldn’t find it do you have a 3x5 shelf?
3mm magnets don't really fit this
3mm magnets do fit. If you have issues with those tolerances, its best to tune your filmant profile.