tracking pixel
JC

Dyson DC23 Impeller V2

by
Jazz Cabbage
Follow
Follow
Remix Model
JC
Jazz Cabbage
|
Image 1 of 11
Dyson DC23 Impeller V2 3d model
JC
Jazz Cabbage
|
Image 1 of 11
Dyson DC23 Impeller V2 3d model
2D
3D
Makes
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model
Dyson DC23 Impeller V2 3d model

UPDATE 3/20/2023:

I've updated the design a bit so that it fits better inside the vacuum. It now resembles the original part a bit more.

V2 Changes:

  • The underside now has a hollow cone shape.
  • The part is shorter so it fits better
  • Zero supports needed
  • The center hole is slightly smaller so it fits the shaft tighter.
  • The part is now 4-5 grams lighter.
  • New photos to the post so you can see how it's installed.

Description: My Dyson DC23 canister vacuum stopped spinning the brush heads. I took it apart and found that the impeller was broken and could not longer hold itself to the metal shaft in the head.

I did not want to buy a $100 part or a new vacuum so I designed this replacement impeller for my Dyson vacuum.

I've had it installed for about 8 months prior to this post and have had no issues or problems with it.


This part is verified working the the following part:

Turbine head Part no. 906565-32 https://www.dyson.com/support/journey/spare-details.906565-32.19076-01

It might work with other models but I don't know which ones. If you do know, please leave a comment.

Thanks.

  • PRINTING - Max infill of 30% otherwise it will be too heavy PETG or better. (PLA might work)

My print settings (0.6mm Nozzle): Material: PCTG Nozzle: 0.6mm CHT Layer Height: 0.2mm Walls: 2 Infill: 25% Gyroid Temperature: 260C


1 Likes16 DownloadsMarch 20, 2023



1 Likes16 DownloadsMarch 20, 2023