tracking pixel
George E

oculus quest 2 front battery holder

by
Iceman2511
Follow
Follow
Remix Model
Iceman2511
Iceman2511
|
Image 2 of 4
oculus quest 2 front battery holder 3d model
Iceman2511
Iceman2511
|
Image 2 of 4
oculus quest 2 front battery holder 3d model
2D
3D
Makes
oculus quest 2 front battery holder 3d model
oculus quest 2 front battery holder 3d model
oculus quest 2 front battery holder 3d model
oculus quest 2 front battery holder 3d model

Link to battery holder V2 with a more secure design and less "moment" weight so it feels lighter than V1: https://thangs.com/mythangs/file/488533

this is a remix and my first design so that you can have a power bank plugged into the oculus while playing, since my power bank has a built-in USB-C cable

The dimensions of the hole for the power bank are 140x21mm big with a little wiggle room for ease of use, if the 140mm direction needs to be bigger or smaller you can go into cura and make a support blocker over the hole, highlight the support blocker and go to "per model settings" and in the modify settings go to infill settings only and adjust the "horizontal expansion" setting.

there are clips on the 3d design to clip onto the vent gap, but if your clips don't print well like mine, use some double sided tape, rubber bands or string to keep it in place, where string would be the best choice for a permeant solution, and the tape and rubber bands for a temporary solution.

if you want the same power bank i have you can buy it from this amazon link: https://www.amazon.co.uk/gp/product/B097819MNF/ref=ox_sc_act_title_1?smid=A3H4EX84EP2E60&psc=1

If you would like to support me and help me buy more filament so I can test and make more designs, you can send money via paypal through this link: https://www.paypal.me/GeorgeElliott11


4 Likes3 DownloadsNovember 11, 2022


4 Likes3 DownloadsNovember 11, 2022