These louvres upgrade your Dewalt DCV517 Vacuum so that it exhausts air (more) toward the back rather then out the sides. The DCV517 from the factory exhausts air sideways which can cause it to push dust and dirt around. Adding these louvres mitigates this by directing the air backward. 

**Features:**
- Print in place, no supports required.
- Sized to fit the factory indents.

**Suggested Print Settings:**
- 0.24 mm layer height
- 3 walls
- 3 top/bottom layers
- No supports

Dewalt DCV517 Vacuum can be found on amazon here (affiliate link):  https://amzn.to/4bbwoIB

Dewalt DV517 Vacuum Exhuast Louvres

DV517 Louver v3.step

Helps align Decora electrical sockets/switches, this tool was specifically designed to align and level double gang Decora boxes but will also help with single gang.

**Features:**
- Sized to space devices for a standard double gang Decora face plate.
- Large slots to give access to mounting screws to allow tightening of device while holding alignment.
- Slot for installation of an optional bubble level (14 mm x 6 mm - based on the one that comes with [Ubiquity U6+ access points](https://amzn.to/43PFrfe)).

**Suggested Print Settings:**
- 0.24 mm layer height
- 3 walls
- 3 top/bottom layers
- No supports

Decora style smart switches can be found on amazon here (affiliate link): https://amzn.to/3U7C148


Decora Alignment Tool

Duplex Alignment Tool v2.step

Screw down wire clips (p-clips) for permanently securing network cabling.

Features:
  - Sized for shielded CAT 6a - 7 mm cable 
  - All sizes mount with a single #10 wood screw

Suggested Print Settings:
  - 0.24 mm layer height
  - 3 walls
  - 3 top / bottom layers
  - Print on the side (with cable hole running vertically) with no supports

Overall Dimensions:
  - 29 mm / 41 mm / 62.2 mm Long (1 / 2 / 4 wire models)
  - 17 mm Wide
  - 12 mm Tall

1,2, and 4 Wire Screw Down Clips

1 Wire Cable Clip v3.step

Circular cable manager allows storage of excess network cable allowing you to clean up your networking equipment.

Features:
  - 104 mm diameter to maintain minimum bend radius on shielded CAT 6a network cable.
  - 21 mm of storage space to fit 3 rows of network cable
  - 18 mm flange
  - 4 x 14 mm strapping locations.
  - Flexible mounting options
     - 2 x #10 mounting holes (sized for standard #10 countersunk wood screws).
     - 1 x 20 mm cutout sized for a large command strip

Overall Dimensions:
  - 140 mm diameter
  - 24.24 mm tall

Suggested Print Settings:
  - 0.24 mm layer height
  - 3 walls
  - 3 bottom layers
  - 2 top layers 
  - No supports

Off brand command strips can be found on amazon here (affiliate link) https://amzn.to/41xBDOH

Circular Network Cable Manager

Circular Network Cable Manager v2.step

Large hook for hanging a dish cloth on my fridge out of puppy reach. Mounts with large command strip adhesive mounts to any compatible surface.

Printed in PETG, 0.24 layer height, minimal supports for fillets.
Model is a bit shorter then the print in the photos (shortened to better fit the strips).

Off brand command strips can be found on amazon here (affiliate link) https://amzn.to/41xBDOH

Not tested but for a more permanent mount 19mm (3/4") double sided tape such as this scotch tape should work (affiliate link) https://amzn.to/3RBVs2F
** The tape area on this model is slightly inset 1.5 - 2mm thick double sided tape should be used

Fridge Hook

Fridge Hook.stl

Quickly and easily organise your wiring with this wire guide. Mounts with large command strip adhesive mounts to any compatible surface.

Off brand command strips can be found on amazon here (affiliate link) https://amzn.to/41xBDOH

Not tested but for a more permanent mount 19mm (3/4") double sided tape such as this scotch tape should work (affiliate link) https://amzn.to/3RBVs2F

Wire Guide

Large Wire Mount v1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Grazz

Achievements

Seedling