Planter castle
A castle inspired planter with water drainage via the moat.
Scaling / size
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great Minimum size (60%): 62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D
Print settings Material usage (100% scale): 200g Print time: 16h (100% scale): 16h
Material usage (60% scale): 50g Print time: 16h (60% scale): 5h
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Planter castle
Stool is the box
Modular Shelf
Infinite Notebook
Clock(lamp)
Frank the frog pen holder
Multifunctional Planter “BRBP”
Sponge holder
Tea bag dispenser
Marshmallow table
Raily – modular wall organization
Mushroom lamp “Amanita Muscaria”
Glasses case
Laundry detergent dispenser
Mushroom coat hook / hanger
Cannon spotlight lamp
Planter “Extra”
Bird feeder | suet ball holder
Cheese shelf bracket
Paper towel holder
