Modular hanging planter
564Β downloadsΒ Β·Β 9 months agoΒ Β·Β **A modular hanging planter that you can customize for your needs.**
The design also comes with a cu
This model is restricted by licensing terms.Β
ViewΒ license.
A modular hanging planter that you can customize for your needs. The design also comes with a cute version that has a face and little dangling arms!
There are several mounting options:
- Four hooks from 20 to 50 mm in diameter for curtain rails
- A ceiling mount to be used with screws or wall mount tape (diameter of the two screw holes 5,5 mm)
- A wall mount to be used with screws or wall mount tape (diameter of the two screw holes 5,5 mm)
Instructions
- Estimate the length of your chain. One chain element adds about 50 mm of length.
- Decide on your mounting option
- Decide if you want the face and arms on the planter or not.
- Print all parts
- Face option only: Glue in the eyes and mouth. Add some glue to the holes in the side of the top. Place the arm on the pin and proceed to put the pin in the hole. Make sure not to get any glue on the arms!
- Add the handle to the top part and pull it up until you hear a click
- Add your plant into the pot
- Water it extensively over the sink
- Wait a little and then add the bottom
- Assemble the rest of the parts
- Mount it
You can always add or remove chain element later if you misjudged the height.
Print settings Required build volume: 160 x 160 x 100 mm Material usage: 160 g
Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none
Modular hanging planter
564Β downloadsΒ Β·Β 9 months agoΒ inΒ Β andΒ
This model is restricted by licensing terms.Β
ViewΒ license.
Stool is the box
Modular Shelf
Infinite Notebook
Clock(lamp)
Frank the frog pen holder
Multifunctional Planter βBRBPβ
Sponge holder
Tea bag dispenser
Marshmallow table
Raily β modular wall organization
Mushroom lamp βAmanita Muscariaβ
Glasses case
Laundry detergent dispenser
Mushroom coat hook / hanger
Cannon spotlight lamp
Planter βExtraβ
Bird feeder | suet ball holder
Cheese shelf bracket
Paper towel holder
Could you make an extension for this one? Let me explain the use case. A few weeks ago, I printed some of those, and my plants grew up (yay!). Today, when I removed the bottom part, I saw that the roots of my basil are advancing to the bottom. So, to avoid moving it to another pot, my idea is to just print another part and connect it between the bottom and the pot itself.
while i like the creativity of the idea, you would not be able to ever re-pot it since you would have to riff off the roots that grew into the bottom soil... I think its better to go with a bigger planter right away?
And what if we create a version of the current one with a detachable bottom part, so I can remove it, connect the extension, and then insert the bottom part into the extension? In that way, I will not need to rip off the roots. Just throwing ideas in the air
By bottom I mean the part that has the holes for the water pass
What should the original diameter be inside the pot at the top (place for the plant)? The friend who's going to print it claims the original is only 86 mm inside. If he scale all the elements by the same percentage, will they match?
As my basil (yay for the basil!) grew up, the small pot is not enough anymore, so today I'll print a scaled up version and let you know if it works!
86 seems to be correct, you can scale this i believe, but it is not tested.