Gazzaladra19K followers

Marshmallow table

Name: Marshmallow table
Brand: Gazzaladra
SKU: 1525040
Price: 12 USD
Availability: InStock
Rating: 5 (151 reviews)

332 downloads · 4 months ago · **A fully 3d printed marshmallow inspired coffee table** Single and multi-color printing models are

Subscribe for access starting at $6 USD

Get access to this model and 66+ more

One-time purchase for $12 USD

This model is restricted by licensing terms.

View license.

Description

A fully 3d printed marshmallow inspired coffee table

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups.

Height: 50 cm Width: 40 cm

Instructions All parts are intended to be glued together! While the glue dries it makes sense to add a little duct tape to keep the parts together under pressure. Remove the tape after the glue dried.

Print all parts
Connect the three center pieces with the primary and secondary connectors
Add the leg connectors and legs
Assembly the top separately with the top connectors.
Add the finished plate to the center

I tested the assembly extensively and I can say that this design managed to support 80 KG when printed in normal PLA. These are my own personal results, and I do not advise using this as chair! This is a coffee table!

Print settings Required build volume: 200 x 200 x 150 mm – If you intend to print it on a plate smaller than 240 mm, you have to rotate the legs by 45 degrees to fit the plate Material usage: 2500 g

All parts beside the connectors need no special settings and your default profile will be enough.

Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none

Only the connectors need more robust settings 6 Walls 6 Top / Bottom layers 40% infill

Tags:

Community Makes (2)

Very easy print, love how it turned out! Originally the top 4 pieces matched (2 and 2) but I failed to realize the tabletop part prints "upside down" so the part touching the bed is the color that will show when assembled. Using filler filaments for the bottom half led to some inconsistent coloring for me but that's on me! No issues with Bambu settings, love the turnout! (Little Jesus for scale)

Did one in black because, sadly, the printing files didn't come with pre-coloring. But I still loved it, and everything fit really great. I didn't have to change a single setting besides the support ones.

Community Makes (2)

Discussions

tsquaredprinting2 months ago

Very easy print, love how it turned out! Originally the top 4 pieces matched (2 and 2) but I failed to realize the tabletop part prints "upside down" so the part touching the bed is the color that will show when assembled. Using filler filaments for the bottom half led to some inconsistent coloring for me but that's on me! No issues with Bambu settings, love the turnout! (Little Jesus for scale)

PrinterBambu Lab A1

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPLA

Layer height0.2 mm

Infill density15 %

bzkrt1010023 months ago

Did one in black because, sadly, the printing files didn't come with pre-coloring. But I still loved it, and everything fit really great. I didn't have to change a single setting besides the support ones.