Would you Like to add some desert charm to your desk? got tacks lying around? Well why not solve both these problems with The Tacktus! That's right, as the name suggests, this stylish succulent doubles as a tack holder! With room on the outside for 24 individual wall tacks and even more space on the inside of the removable pot, you will never have to worry about your tacks going missing ever again. 

Printing notes:
This is a 3 part print containing the **Top** cactus, the **Sand**, and the **Pot**. 
A well tuned machine should have little issues printing the pin holes for the tacks, however if there is issues, grab a lighter and heat the end of a tack to melt any plastic that may have drooped into the holes. Additionally the Top and Pot will screw together, the threads are designed with a 0.3mm clearance on either side resulting in a 0.6mm tolerance all around. If your printer is well tuned, this shouldnt be a problem, but some sanding could be necessary if not. Also I used organic supports for the **Top** So the threads could be properly supported, **you may have to put a support blocker on the pin holes **

Additional Notes:
-I printed the **Pot** with a slight fuzzy skin (in White PLA) then painted it terracotta colored to make it look realistic! Also if you add some Baking powder to your paint, it gives it the terracotta-like feel! (I used about .5oz baking powder of every 1oz of paint) 
-I have attached the Fusion File and a STEP File if you would like to make any changes!
--3D Entrepreneurs if you would like to sell this product then by all means please do so!

The Tacktus

Tacktus Top .3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

GallatinValley3D

Achievements

Seedling

Explorer

The Tacktus