Colby G
ForgeCore50K followers
Follow
ForgeCore
ForgeCore
|
Image 1 of 7
Sunflower Lamp 3d model
ForgeCore
ForgeCore
|
Image 1 of 7
Sunflower Lamp 3d model
Sunflower Lamp video thumbnail
Sunflower Lamp 3d model
Sunflower Lamp 3d model
Sunflower Lamp 3d model
Sunflower Lamp 3d model
Sunflower Lamp 3d model
Sunflower Lamp 3d model
Sunflower Lamp 3d model

Sunflower Lamp

Instructions Hardware Filaments

The Sunflower Lamp! - Advanced

This idea has been a work in progress for awhile. The flower features an aperture mechanism allowing the light to blossom, and also dim in brightness. These are great for nightstand, nurseries, and end tables to use as a reading light, or night lights.

Community Makes (9)
Printed this as a Christmas gift for my grandmother, Sunflowers are her favorite and we lost our grandfather some years ago. I thought adding the 60mm lithophane disc to the center was a nice touch. Now she can have the two things she loves the most on her nightstand.

If you decide to do a Litho like I did I recommend printing it in, at minimum, PETG. The Lithophane does touch the bulb and is a very tight fit to get in.

The tolerances were a tad on the small side for some of the pedals and yellow parts of the iris and the bottom cap for the pot BUT that might have been an issue with my printer calibration.
I printed this in PLA the first time but the leaf stems kept snapping so I did PETG for the green parts and it was perfect.
Make by user
This sunflower lamp has such great detail.
Le détail des feuilles est prodigieux, superbe , dommage de ne pas en avoir mis sur les pétales.
L'ampoule que tu utilises ne se trouve pas en France 😰 je vais devoir chercher...
Les pétales ont été collés au support marron qui tourné. Mais l'ensemble se casse la gueule, trop de tolérance dans le trou , il aurait fallut les clipser. Mais là je ne peux rien faire ... . Et on ne peut pas le coller , car il tourne
Gros défaut dans le vissage de la fleur et la tige , c'est pas bien axé, comme on me voit sur la photo, un autre a le même problème. ..
Marron, vert olive, beige Pla Bambulab 
Jaune mangue de chez Eryone
For stem and leafs I used eryone olive

For the petals I used elegoo matte yellow

Pot is giant arm terracotta 
And dirt is elegoo matte brown

I used the source links for the wired and bulb and they fit and worked great.
It took me some time to find a pendant kit and I had some issues with the leaves that I didn't push in enough but now that is all solved it is a very nice lamp.
It brings the sun into your house when you light it.
Light up the flower:)
It’s amazing!
Printed this as a Christmas gift for my grandmother, Sunflowers are her favorite and we lost our grandfather some years ago. I thought adding the 60mm lithophane disc to the center was a nice touch. Now she can have the two things she loves the most on her nightstand.

If you decide to do a Litho like I did I recommend printing it in, at minimum, PETG. The Lithophane does touch the bulb and is a very tight fit to get in.

The tolerances were a tad on the small side for some of the pedals and yellow parts of the iris and the bottom cap for the pot BUT that might have been an issue with my printer calibration.
I printed this in PLA the first time but the leaf stems kept snapping so I did PETG for the green parts and it was perfect.
Make by user
This sunflower lamp has such great detail.
Le détail des feuilles est prodigieux, superbe , dommage de ne pas en avoir mis sur les pétales.
L'ampoule que tu utilises ne se trouve pas en France 😰 je vais devoir chercher...
Les pétales ont été collés au support marron qui tourné. Mais l'ensemble se casse la gueule, trop de tolérance dans le trou , il aurait fallut les clipser. Mais là je ne peux rien faire ... . Et on ne peut pas le coller , car il tourne
Gros défaut dans le vissage de la fleur et la tige , c'est pas bien axé, comme on me voit sur la photo, un autre a le même problème. ..
Marron, vert olive, beige Pla Bambulab 
Jaune mangue de chez Eryone
For stem and leafs I used eryone olive

For the petals I used elegoo matte yellow

Pot is giant arm terracotta 
And dirt is elegoo matte brown

I used the source links for the wired and bulb and they fit and worked great.
It took me some time to find a pendant kit and I had some issues with the leaves that I didn't push in enough but now that is all solved it is a very nice lamp.
It brings the sun into your house when you light it.
Light up the flower:)
It’s amazing!


Community Makes (9)
Printed this as a Christmas gift for my grandmother, Sunflowers are her favorite and we lost our grandfather some years ago. I thought adding the 60mm lithophane disc to the center was a nice touch. Now she can have the two things she loves the most on her nightstand.

If you decide to do a Litho like I did I recommend printing it in, at minimum, PETG. The Lithophane does touch the bulb and is a very tight fit to get in.

The tolerances were a tad on the small side for some of the pedals and yellow parts of the iris and the bottom cap for the pot BUT that might have been an issue with my printer calibration.
I printed this in PLA the first time but the leaf stems kept snapping so I did PETG for the green parts and it was perfect.
Make by user
This sunflower lamp has such great detail.
Le détail des feuilles est prodigieux, superbe , dommage de ne pas en avoir mis sur les pétales.
L'ampoule que tu utilises ne se trouve pas en France 😰 je vais devoir chercher...
Les pétales ont été collés au support marron qui tourné. Mais l'ensemble se casse la gueule, trop de tolérance dans le trou , il aurait fallut les clipser. Mais là je ne peux rien faire ... . Et on ne peut pas le coller , car il tourne
Gros défaut dans le vissage de la fleur et la tige , c'est pas bien axé, comme on me voit sur la photo, un autre a le même problème. ..
Marron, vert olive, beige Pla Bambulab 
Jaune mangue de chez Eryone
For stem and leafs I used eryone olive

For the petals I used elegoo matte yellow

Pot is giant arm terracotta 
And dirt is elegoo matte brown

I used the source links for the wired and bulb and they fit and worked great.
It took me some time to find a pendant kit and I had some issues with the leaves that I didn't push in enough but now that is all solved it is a very nice lamp.
It brings the sun into your house when you light it.
Light up the flower:)
It’s amazing!
Printed this as a Christmas gift for my grandmother, Sunflowers are her favorite and we lost our grandfather some years ago. I thought adding the 60mm lithophane disc to the center was a nice touch. Now she can have the two things she loves the most on her nightstand.

If you decide to do a Litho like I did I recommend printing it in, at minimum, PETG. The Lithophane does touch the bulb and is a very tight fit to get in.

The tolerances were a tad on the small side for some of the pedals and yellow parts of the iris and the bottom cap for the pot BUT that might have been an issue with my printer calibration.
I printed this in PLA the first time but the leaf stems kept snapping so I did PETG for the green parts and it was perfect.
Make by user
This sunflower lamp has such great detail.
Le détail des feuilles est prodigieux, superbe , dommage de ne pas en avoir mis sur les pétales.
L'ampoule que tu utilises ne se trouve pas en France 😰 je vais devoir chercher...
Les pétales ont été collés au support marron qui tourné. Mais l'ensemble se casse la gueule, trop de tolérance dans le trou , il aurait fallut les clipser. Mais là je ne peux rien faire ... . Et on ne peut pas le coller , car il tourne
Gros défaut dans le vissage de la fleur et la tige , c'est pas bien axé, comme on me voit sur la photo, un autre a le même problème. ..
Marron, vert olive, beige Pla Bambulab 
Jaune mangue de chez Eryone
For stem and leafs I used eryone olive

For the petals I used elegoo matte yellow

Pot is giant arm terracotta 
And dirt is elegoo matte brown

I used the source links for the wired and bulb and they fit and worked great.
It took me some time to find a pendant kit and I had some issues with the leaves that I didn't push in enough but now that is all solved it is a very nice lamp.
It brings the sun into your house when you light it.
Light up the flower:)
It’s amazing!

Discussions
3D P
3DPrintalot
It took me some time to find a pendant kit and I had some issues with the leaves that I didn't push in enough but now that is all solved it is a very nice lamp. It brings the sun into your house when you light it.
It took me some time to find a pendant kit and I had some issues with the leaves that I didn't push in enough but now that is all solved it is a very nice lamp.
It brings the sun into your house when you light it. 3d model
 3d model
 3d model
YoungPrint3D
YoungPrint3D
I printed this in PLA the first time but the leaf stems kept snapping so I did PETG for the green parts and it was perfect.
I printed this in PLA the first time but the leaf stems kept snapping so I did PETG for the green parts and it was perfect.  3d model
 3d model
 3d model
 3d model
 3d model
 3d model
PrinterBambu Lab P1S
Colby G
ForgeCore

Beautiful! Thanks for sharing

SP
Stellar Prints
This sunflower lamp has such great detail.
This sunflower lamp has such great detail. 3d model
PrinterBambu Lab P1S
MaterialPLA
Yaya A
yayabeber
Le détail des feuilles est prodigieux, superbe , dommage de ne pas en avoir mis sur les pétales. L'ampoule que tu utilises ne se trouve pas en France 😰 je vais devoir chercher... Les pétales ont été collés au support marron qui tourné. Mais l'ensemble se casse la gueule, trop de tolérance dans le trou , il aurait fallut les clipser. Mais là je ne peux rien faire ... . Et on ne peut pas le coller , car il tourne Gros défaut dans le vissage de la fleur et la tige , c'est pas bien axé, comme on me voit sur la photo, un autre a le même problème. .. Marron, vert olive, beige Pla Bambulab Jaune mangue de chez Eryone
Le détail des feuilles est prodigieux, superbe , dommage de ne pas en avoir mis sur les pétales.
L'ampoule que tu utilises ne se trouve pas en France 😰 je vais devoir chercher...
Les pétales ont été collés au support marron qui tourné. Mais l'ensemble se casse la gueule, trop de tolérance dans le trou , il aurait fallut les clipser. Mais là je ne peux rien faire ... . Et on ne peut pas le coller , car il tourne
Gros défaut dans le vissage de la fleur et la tige , c'est pas bien axé, comme on me voit sur la photo, un autre a le même problème. ..
Marron, vert olive, beige Pla Bambulab 
Jaune mangue de chez Eryone 3d model
 3d model
 3d model
 3d model
 3d model
PrinterBambu Lab A1
Print bed sizeX: 257 mm; Y: 257 mm; Z: 257 mm
MaterialPLA
Layer height0.2 mm
Infill density8 %
IL
icellent
Light up the flower:)
Light up the flower:) 3d model
 3d model
F
freeBanana5
It’s amazing!
It’s amazing! 3d model
Robert P
toytaco2003
Printed this as a Christmas gift for my grandmother, Sunflowers are her favorite and we lost our grandfather some years ago. I thought adding the 60mm lithophane disc to the center was a nice touch. Now she can have the two things she loves the most on her nightstand. If you decide to do a Litho like I did I recommend printing it in, at minimum, PETG. The Lithophane does touch the bulb and is a very tight fit to get in. The tolerances were a tad on the small side for some of the pedals and yellow parts of the iris and the bottom cap for the pot BUT that might have been an issue with my printer calibration.
Printed this as a Christmas gift for my grandmother, Sunflowers are her favorite and we lost our grandfather some years ago. I thought adding the 60mm lithophane disc to the center was a nice touch. Now she can have the two things she loves the most on her nightstand.

If you decide to do a Litho like I did I recommend printing it in, at minimum, PETG. The Lithophane does touch the bulb and is a very tight fit to get in.

The tolerances were a tad on the small side for some of the pedals and yellow parts of the iris and the bottom cap for the pot BUT that might have been an issue with my printer calibration. 3d model
 3d model
PrinterBambu Lab A1
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA
Layer height0.2 mm
Infill density15 %
crazyvetfam
crazyvetfam
 3d model
Ben P
Mr dirty duck
For stem and leafs I used eryone olive For the petals I used elegoo matte yellow Pot is giant arm terracotta And dirt is elegoo matte brown I used the source links for the wired and bulb and they fit and worked great.
For stem and leafs I used eryone olive

For the petals I used elegoo matte yellow

Pot is giant arm terracotta 
And dirt is elegoo matte brown

I used the source links for the wired and bulb and they fit and worked great.
 3d model
 3d model
PrinterBambu Lab P1S
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA+
Layer height0.16 mm
Infill density12 %
Yaya A
yayabeber

Je vois que tu as le même problème que moi . Il y a un décalage dans le serrage de la fleur . Je le poster

View all 34 discussions

Sunflower Lamp

2K downloads · 2 years ago
Colby G
ForgeCore50K followers
Follow