This is not finalized. Tolerances are too great. Charger holder for Tozo S3 smart watch.

I create mostly utilitarian functional models. Generally addressing the need is the primary concern and looks come secondary, if considered at all.

Please leave a comment if you print this and find it useful!

HSW ‘dock’ for Tozo S3 smart watch that retains magnetic charge end of USB cord. Tozo S3 watch is set onto this, face up, watch right side facing out.

Two versions-

“HSW Smart Watch Charge Dock - Through Hole” has a hole through the dock - feed the magnetic watch end of the USB cord up through the hole and then press into place in the negative recess. “HSW Smart Watch Charge Dock - No Hole” has no hole - magnetic watch end of the USB cord is pressed into place in the negative recess and cord is ran down side through groove. Both versions have two small holes at the left side for a thin zip tie to hold the cord to the dock.

Dock is secured to the HSW using one or two of the three bolt holes. I suggest mounting this using two M3 bolts (to keep it from rotating on the HSW) to the HSW M3 bolt Inserts like this from Rostap ("insert-with-M3.stl").

My charge cord magnetic end is slightly loose in the model - it may be best to glue it in place.