tracking pixel
AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
DaveMakesStuff

Lightshade with Captive Dimmer Beads

by
DaveMakesStuff
Follow
Follow
Remix Model
Social
valacbynon
valacbynon
|
|
Image 5 of 5
Lightshade with Captive Dimmer Beads - Well here's the one that I printed out the main secret I found out basically is you don't use supports use a raft you keep it at regular settings and to open the little holes I found out I did this. I use a nail file you can use anything that's small but you want to put in the hole the device that you're going to use and wiggle it back and forth about 2 or 3 times just go back and forth very slowly do that for each hole and they'll turn and that's it this one took about 21 hours and I think it came out really well - 3d model
valacbynon
valacbynon
|
|
Image 5 of 5
Lightshade with Captive Dimmer Beads - Well here's the one that I printed out the main secret I found out basically is you don't use supports use a raft you keep it at regular settings and to open the little holes I found out I did this. I use a nail file you can use anything that's small but you want to put in the hole the device that you're going to use and wiggle it back and forth about 2 or 3 times just go back and forth very slowly do that for each hole and they'll turn and that's it this one took about 21 hours and I think it came out really well - 3d model
2D
3D
Makes
Lightshade with Captive Dimmer Beads 3d model
Lightshade with Captive Dimmer Beads 3d model
Lightshade with Captive Dimmer Beads 3d model
Lightshade with Captive Dimmer Beads 3d model
Lightshade with Captive Dimmer Beads - Well here's the one that I printed out the main secret I found out basically is you don't use supports use a raft you keep it at regular settings and to open the little holes I found out I did this. I use a nail file you can use anything that's small but you want to put in the hole the device that you're going to use and wiggle it back and forth about 2 or 3 times just go back and forth very slowly do that for each hole and they'll turn and that's it this one took about 21 hours and I think it came out really well - 3d model
This model is restricted by licensing terms. 
View license.

This print-in-place lightshade has captive beads that can be rotated to adjust the amount of light.

See here for video: https://youtu.be/i2H491pUNUo

To use with a hanging light, print the standard file and drill an appropriately sized hole for your light and wiring.

To use as a shade for a tealight, print the model with no bottom and place over or tealight.

Categories:

Home
All
,
Art
All

Tags:

50 Likes126 DownloadsJuly 16, 2022
50 Likes126 DownloadsJuly 16, 2022
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy