Central dice tower, disassembles into three pieces for use in a party as central piece. Assembled it has a total height of 16cm.
A fitting dice tray is included with room where the tower should be placed. Version 3 is the optimized version including ribs inside the shaft causing dice movement, planks and ribs under the roof.
STLs include three pieces of the tower and the tray. Tray is saved as STL of 250mm and tower pieces are sized accordingly.
Printing in Creality K1 Max takes 5.5 hours with a total filament use of 53m (160g)
Categories:
1 Likes0 DownloadsOctober 21, 2024